On Thu, 21 Jun 2018 at 15:02, Zoran S <zoran.stojsavljevic.de@gmail.com> wrote:
Hello Folks,

Long time no see. Seems that I am back (for limited time) to Lava testing, and after all the setups and catches 22, I managed to get to the bottom of it, within few days.

I have interesting problem to report.

vagrant@stretch:/etc/lava-server/dispatcher-config/device-types$ dpkg -l lava-server lava-dispatcher
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                                       Version                    Architecture               Description
+++-==========================================-==========================-==========================-==========================================================================================
ii  lava-dispatcher                            2018.5-3~bpo9+1            amd64                      Linaro Automated Validation Architecture dispatcher
ii  lava-server                                2018.5-3~bpo9+1            all                        Linaro Automated Validation Architecture server

## Issue Background
Issue CIP testing #16 seems to be very similar: Beaglebone Black health-check job is failing at restart
## Issue description
Wrong Ramdisk Image Format Ramdisk image is corrupt or invalid
## Acceptance criteria
The tftp 0x88080000 22/tftp-deploy-on2jld77/ramdisk/ramdisk.cpio.gz.uboot
Using cpsw devtftp 0x88080000 22/tftp-deploy-on2jld77/ramdisk/ramdisk.cpio.gz.uboot

The initramdisk is built by the following instructions:
https://wiki.linuxfoundation.org/civilinfrastructureplatform/cipsystembuildhowto

I used both BusyBox 28.0 and latest stable BusyBox 28.4 (failure seems to be the same)!

Should download seamlessly, but it does not. It reports that the image is corrupt. The full log is at:
local test of ramdisk test on bbb - Lava job 22
https://pastebin.com/y9n4GM5G

The .yaml file is at:
[lava 2018.5-3] job_name: local test of ramdisk test on bbb
https://pastebin.com/kqS2dqWM
_______

Namely, the download order is somehow scrambled!

​Check this thread on this list from last month:


I can't be certain because although you attached the test job log file, you didn't attach the device configuration.

Other possibilities include something genuinely wrong with that ramdisk. You attached a test job submission where the standard ARMMP ramdisk is commented out. Does the test job work with all of the standard ARMMP BBB files in place in the test job?

Kernelci uses OE based ramdisks, so try one of theirs? Or try one of the ramdisks from completed test jobs on validation.linaro.orghttps://validation.linaro.org/scheduler/job/1883601

 

Thank you,
Zoran Stojsavljevic


--

Neil Williams
=============
neil.williams@linaro.org
http://www.linux.codehelp.co.uk/