Hi Pawan,

This setting comes from device type. I guess I can also set it in the
device dictionary. Quick grep through LAVA sources shows this:
{% set uboot_extra_error_message = 'Invalid partition' %}
https://gitlab.com/search?group_id=6533952&repository_ref=master&scope=blobs&search=%22Invalid+partition%22

As one of the examples shows, you can also set this as job context:

context:
  uboot_extra_error_message: "Invalid partition"

https://gitlab.com/lava/functional-tests/-/blob/master/release/x15-extended.yaml

Hope this helps.

Best Regards,
Milosz

On Tue, Jan 9, 2024 at 10:05 AM pawanKumar <pawan4749@gmail.com> wrote:
>
> Hello Team,
>
> I was trying to flash a binary on the device and run the tests on the device by using lava overlay.
> Board flashes successfully but while booting the device in the boot log there is a word "** Invalid partition 3 **"  lava catches the key word and throws an error message.
> For the other devices it is not catching this error with the same boot log. Only on one device I'm observing this issue.
>
> Please let me know How to ignore the keyword and move on to run the tests.
>
> matched a bootloader error message: 'Invalid partition' (17)
> boot log:
> U-Boot SPL 2022.04 (Nov 30 2023 - 20:10:15 +0000)
> power_bd71837_init
> DDRINFO: start DRAM init
> DDRINFO: DRAM rate 1600MTS
> DDRINFO:ddrphy calibration done
> DDRINFO: ddrmix config done
> Normal Boot
> Trying to boot from MMC1
> hab fuse not enabled
> Authenticate image from DDR location 0x401fcdc0...
> NOTICE:  BL31: v2.6(release):lf-5.15.32-2.0.0-0-gc6a19b1a3-dirty
> NOTICE:  BL31: Built : 06:37:22, Jun  7 2022
> U-Boot 2022.04 (Nov 30 2023 - 20:10:15 +0000)
> CPU:   i.MX8MMD rev1.0 1600 MHz (running at 1200 MHz)
> CPU:   Industrial temperature grade (-40C to 105C) at 44C
> Reset cause: POR
> Model:
> DRAM:  224 MiB
> board_init
> Core:  61 devices, 21 uclasses, devicetree: separate
> MMC:   FSL_SDHC: 0
> Loading Environment from nowhere... OK
> In:    serial
> Out:   serial
> Err:   serial
> SEC0:  RNG instantiated
>  BuildInfo:
>   - ATF c6a19b1
> facmod value is 1!
> pulse number is 0�flash target is MMC:0
> Fastboot: Normal
> Normal Boot
>
> Hit any key to stop autoboot:  2
> end: 3.4.2 bootloader-interrupt (duration 00:00:05) [common]
> start: 3.4.3 bootloader-commands (timeout 00:02:52) [common]
> Setting prompt string to ['=>']
> bootloader-commands: Wait for prompt ['=>'] (timeout 00:02:52)
> 0
> Setting prompt string to ['=>']
> Sending with 5 millisecond of delay
> setenv factorymode 1
> u-boot=> setenv factorymode 1
> bootloader-commands: Wait for prompt ['=>'] (timeout 00:02:51)
> setenv factorymode 1
> Sending with 5 millisecond of delay
> boot
> u-boot=> boot
>
> boot
> ** Invalid partition 3 **
> Couldn't find partition mmc 0:3
> Can't set block device
> uEnv not found in mmcpart3, checking mmcpart1
> Failed to load '/boot/system/uEnv'
> uEnv not found in mmcpart 1 either!
> Booting from mmc ...
> ## Error: \"w\" not defined
> matched a bootloader error message: 'Invalid partition' (17)
> end: 3.4.3 bootloader-commands (duration 00:00:02) [common]
> case: bootloader-commands
> case_id: 204071
> definition: lava
> duration: 1.52
> extra: ...
> level: 3.4.3
> namespace: common
> result: fail
>
> Best Regards
> Pavan Kumar
> _______________________________________________
> lava-devel mailing list -- lava-devel@lists.lavasoftware.org
> To unsubscribe send an email to lava-devel-leave@lists.lavasoftware.org