On Fri, 27 Mar 2020 at 13:57, koti koti <kotisoftwaretest@gmail.com> wrote:
>
> Hi Remi Duraffort,
>
> Thanks for you reply.
>
> 1. beaglebone:  (success)
> #############
>           a. Yes. it is working with "minimal"  for begalbone. ( I am able to run the test with out deploy and falsh . attached the YAML file which I have used)
>           b. I am fine with minimal for begalbone to run the tests for Provisioned board.
>
> 2. dragonboard-845c:       (still I am facing the issue)
> ##################
>          a). is any one tried  Provision  boot (bootee board)  with "minimal" method for Dragonboards?
>          b). I am facing the issue to run the health checkup  using "minimal" boot method for already provision Dragon series boards.   (I am not sure minimal boot is supported for Dragonboard series or not )

In our instance this isn't possible as we deleted 'boot' partition. So
the board will go to fasboot by default.

milosz

>
>
> Please can some let me know your suggestions for "dragonboard"  minimal boot for already provision (booted board) board?
>
> Regards,
> Koti
>
> On Tue, 24 Mar 2020 at 21:04, Rémi Duraffort <remi.duraffort@linaro.org> wrote:
>>
>> Hello,
>> LAVA is starting the connection un the boot action.
>> Without a boot action, the connection is not created.
>>
>> Have you tried using a minimal boot?
>>
>> Rgds
>>
>> Le 23 mars 2020 19:45:32 GMT+01:00, koti koti <kotisoftwaretest@gmail.com> a écrit :
>>>
>>> Hi,
>>>
>>> The issue/error I am facing in results page with out "-boot" section in my YAML file  is as follows i.e
>>>
>>> "
>>> lava-dispatcher, installed at version: 2019.12
>>> start: 0 validate
>>> Start time: 2020-03-23 18:31:11.011685+00:00 (UTC)
>>> validate duration: 0.00
>>> case: validate
>>> case_id: 339
>>> definition: lava
>>> result: pass
>>> start: 1 lava-test-interactive-retry (timeout 00:15:00) [common]
>>> start: 1.1 lava-test-interactive (timeout 00:15:00) [common]
>>> Connection closed
>>> end: 1.1 lava-test-interactive (duration 00:00:00) [common]
>>> case: lava-test-interactive
>>> case_id: 340
>>> definition: lava
>>> duration: 0.00
>>> extra: ...
>>> level: 1.1
>>> namespace: common
>>> result: fail
>>> lava-test-interactive-retry failed: 1 of 1 attempts. 'Connection closed'
>>> Connection closed
>>> end: 1 lava-test-interactive-retry (duration 00:00:00) [common]
>>> case: lava-test-interactive-retry
>>> case_id: 341
>>> definition: lava
>>> duration: 0.00
>>> extra: ...
>>> level: 1
>>> namespace: common
>>> result: fail
>>> Cleaning after the job
>>> start: 2.1 power-off (timeout 00:00:10) [common]
>>> end: 2.1 power-off (duration 00:00:00) [common]
>>> case: power-off
>>> case_id: 342
>>> definition: lava
>>> duration: 0.00
>>> extra: ...
>>> level: 2.1
>>> namespace: common
>>> result: pass
>>> start: 2.2 read-feedback (timeout 00:15:00) [common]
>>> end: 2.2 read-feedback (duration 00:00:00) [common]
>>> InfrastructureError: The Infrastructure is not working correctly. Please report this error to LAVA admins.
>>> case: job
>>> case_id: 343
>>> definition: lava
>>> error_msg: Connection closed
>>> error_type: Infrastructure
>>> result: fail
>>> "
>>>
>>> Regards,
>>> Koti
>>>
>>> On Tue, 24 Mar 2020 at 00:13, koti koti <kotisoftwaretest@gmail.com> wrote:
>>>>
>>>> Hi,
>>>>
>>>> I am able to boot and run the tests with Provisioned(booted)  board using attached  YAML i.e  "working_yaml.yaml".
>>>>
>>>> But, I am facing the issue while running the tests on Provisioned (booted) board with out "-boot" section. (you can see my YAML file as mentioned below which I have used now)
>>>>
>>>> Please can some one help me for the same?
>>>>
>>>>    1. Basically I am facing the connection issue with out "-boot" section.
>>>>    2. Why this dependency to connect terminal for boot section ? ( I am able to connect serial port when I use "-boot" section in yaml file)
>>>>    3. Please can some one provide me right YAML to run my tests with out "-boot" section. ( to resolve serial connection issue with out "-boot" section)
>>>>
>>>>
>>>> "
>>>> device_type: beaglebone-black
>>>> job_name:  begalbone healthcheck
>>>> timeouts:
>>>>   job:
>>>>     minutes: 30
>>>>   action:
>>>>     minutes: 15
>>>>   connection:
>>>>     minutes: 5
>>>> priority: medium
>>>> visibility: public
>>>> context:
>>>>   test_character_delay: 10
>>>> actions:
>>>>
>>>> #- boot:
>>>> #    timeout:
>>>> #      minutes: 15
>>>> #    method: minimal
>>>> ##    reset: false
>>>> ##    auto_login:
>>>> ##      login_prompt: '.* login:'
>>>> ##      username: root
>>>> #    prompts:
>>>> #    - root@dragonboard-410c:~#
>>>>
>>>> - test:
>>>>     interactive:
>>>>     - name: reset
>>>>       prompts: ["#"]
>>>>       script:
>>>>       - name: reset
>>>>         command: reset
>>>>
>>>> "
>>>>
>>>> Regards,
>>>> Koti
>>
>>
>> --
>> Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez excuser ma brièveté.
>
> _______________________________________________
> Lava-users mailing list
> Lava-users@lists.lavasoftware.org
> https://lists.lavasoftware.org/mailman/listinfo/lava-users