Hi,

The issue/error I am facing in results page with out "-boot" section in my YAML file  is as follows i.e

"
lava-dispatcher, installed at version: 2019.12
start: 0 validate
Start time: 2020-03-23 18:31:11.011685+00:00 (UTC)
validate duration: 0.00
case: validate
case_id: 339
definition: lava
result: pass
start: 1 lava-test-interactive-retry (timeout 00:15:00) [common]
start: 1.1 lava-test-interactive (timeout 00:15:00) [common]
Connection closed
end: 1.1 lava-test-interactive (duration 00:00:00) [common]
case: lava-test-interactive
case_id: 340
definition: lava
duration: 0.00
extra: ...
level: 1.1
namespace: common
result: fail
lava-test-interactive-retry failed: 1 of 1 attempts. 'Connection closed'
Connection closed
end: 1 lava-test-interactive-retry (duration 00:00:00) [common]
case: lava-test-interactive-retry
case_id: 341
definition: lava
duration: 0.00
extra: ...
level: 1
namespace: common
result: fail
Cleaning after the job
start: 2.1 power-off (timeout 00:00:10) [common]
end: 2.1 power-off (duration 00:00:00) [common]
case: power-off
case_id: 342
definition: lava
duration: 0.00
extra: ...
level: 2.1
namespace: common
result: pass
start: 2.2 read-feedback (timeout 00:15:00) [common]
end: 2.2 read-feedback (duration 00:00:00) [common]
InfrastructureError: The Infrastructure is not working correctly. Please report this error to LAVA admins.
case: job
case_id: 343
definition: lava
error_msg: Connection closed
error_type: Infrastructure
result: fail
"

Regards,
Koti

On Tue, 24 Mar 2020 at 00:13, koti koti <kotisoftwaretest@gmail.com> wrote:
Hi,

I am able to boot and run the tests with Provisioned(booted)  board using attached  YAML i.e  "working_yaml.yaml".

But, I am facing the issue while running the tests on Provisioned (booted) board with out "-boot" section. (you can see my YAML file as mentioned below which I have used now)

Please can some one help me for the same?

   1. Basically I am facing the connection issue with out "-boot" section.
   2. Why this dependency to connect terminal for boot section ? ( I am able to connect serial port when I use "-boot" section in yaml file)
   3. Please can some one provide me right YAML to run my tests with out "-boot" section. ( to resolve serial connection issue with out "-boot" section)
 

"
device_type: beaglebone-black
job_name:  begalbone healthcheck
timeouts:
  job:
    minutes: 30
  action:
    minutes: 15
  connection:
    minutes: 5
priority: medium
visibility: public
context:
  test_character_delay: 10
actions:

#- boot:
#    timeout:
#      minutes: 15
#    method: minimal
##    reset: false
##    auto_login:
##      login_prompt: '.* login:'
##      username: root
#    prompts:
#    - root@dragonboard-410c:~#

- test:
    interactive:
    - name: reset
      prompts: ["#"]
      script:
      - name: reset
        command: reset

"

Regards,
Koti