Hi Milosz,

Thanks for your reply and inputs.

As per your suggestions I have updated my comments as inline. 

Hope my comments make sense.

Regards,
Koti
On Tue, 14 Apr 2020 at 13:36, Milosz Wasilewski <milosz.wasilewski@linaro.org> wrote:
Hi,

On Tue, 14 Apr 2020 at 08:32, koti koti <kotisoftwaretest@gmail.com> wrote:
>
> Hi,
>
> initially we have plan to connect 5 boards to my lava-master and lava-dispatchers.
>
> Please can some let me know servers configurations for this setup as mentioned below?
>
> a. Can you let me know the LAVA master server configuration ? ( Processor/DDR/memory etc... configurations details)
> b. Can you let me know the Dispatcher server configuration ?  (Processor/DDR/memory etc...configuration details)  .  ( I guess Dispatcher server configuration may be less than Master server configuration)

Both of these really depend on the target you're planning to use. In
my experience adb/fastboot usually require more resources. We try to
aim at one physical CPU core per device in such situation. If you
don't plan to use adb/fastboot you don't need as much. As for master
it should be able to deal with the amount of logs your jobs generate.
If you don't have very long logs, then master doesn't need to be very
powerful. However it's worth looking ahead and preparing to expand the
lab. So more powerful master should be considered. You can also think
about hosting your master in the cloud. This gives you even more
flexibility.

we can use the Dispatchers as below
Dispatchers:
########
rpi3 (very slow)
rpi4
https://www.seeedstudio.com/ODYSSEY-X86J4105800-p-4445.html
https://www.lattepanda.com
odroid-xu3

Master-Servers: (May be)
############
 HP proliant configurations

> c. PDU (I guess initial we have plan to connect 5 targets)  . (If possible please can you share me the Amazon link to orfer)

The sky is the limit here. You can use GPIO relay with RPi[1],
ethernet relay[2], managed PDU [3] or something else as long as it can
be controlled remotely by software.

> d. Serial port hub .  (I guess initial we have plan to connect 5 targets)  . (If possible please can you share me the Amazon link to order)

hmm, do you mean serial concentrator? How do you connect to UART on your boards?

[1] https://www.okdo.com/p/raspberry-pi-relay-board-v1-0/
[2] https://www.robot-electronics.co.uk/htm/eth008tech.htm
[3] https://www.ebuyer.com/780082-apc-switched-rack-pdu-ap7920b-ap7920b

[1] https://www.okdo.com/p/raspberry-pi-relay-board-v1-0/
[2] https://www.robot-electronics.co.uk/htm/eth008tech.htm
[3] https://www.ebuyer.com/780082-apc-switched-rack-pdu-ap7920b-ap7920b

Regards,
Koti
 
milosz

>
> Regards,
> Koti
> _______________________________________________
> Lava-users mailing list
> Lava-users@lists.lavasoftware.org
> https://lists.lavasoftware.org/mailman/listinfo/lava-users