Hello,

this is due to a misconfiguration of your device. The device dictionary is missing the connection commands.

See https://staging.validation.linaro.org/scheduler/device/staging-black02/devic...

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Rgds

Le jeu. 8 oct. 2020 à 16:38, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Lava users,

I am getting “ Job error: Invalid job data: ['Unable to connect to shell - missing connections block.'] “ error while submitting jobs which is using ‘uuu’ deploy and boot method.

Same job I am using in a different server and there it is working perfectly. Both the servers are using same version.

Please check the attached job yaml file (uuu-job.yaml) and the job log (uuu-job-fail-log.txt).

Regards, Bhargav _______________________________________________ Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users

Le jeu. 8 oct. 2020 à 18:31, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

In the following line ‘uart0’ needs to be obtained from the worker where the target is connected or it is just a tag ?

{% set connection_list = ['uart0'] %}

This name is just an internal reference to indicate to lava that it should use "uart0" from the connection command:

{% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Also, as I have mentioned in another server I am not facing this issue even that target doesn’t have the connection commands in the device dictionary.

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 08 October 2020 09:52 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Hello,

this is due to a misconfiguration of your device. The device dictionary is missing the connection commands.

See https://staging.validation.linaro.org/scheduler/device/staging-black02/devic...

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Rgds

Le jeu. 8 oct. 2020 à 16:38, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Lava users,

I am getting “ Job error: Invalid job data: ['Unable to connect to shell - missing connections block.'] “ error while submitting jobs which is using ‘uuu’ deploy and boot method.

Same job I am using in a different server and there it is working perfectly. Both the servers are using same version.

Please check the attached job yaml file (uuu-job.yaml) and the job log (uuu-job-fail-log.txt).

Regards, Bhargav

---

Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users

--

Rémi Duraffort

LAVA Architect

Linaro

Hello,

could you paste the device dictionary after the rendering? Click on "Rendered YAML" tab.

Rgds

Le mer. 14 oct. 2020 à 14:11, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

After adding these line in the device dictionary as you suggested I was able to successfully execute my job in a imx6 device

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

But now when I am trying to execute a similar job in imx8mmini device, I am again getting the same error

*Job error: Invalid job data: ['Unable to connect to shell - missing connections block.']*

Here is my device dictionary

{% extends 'imx8mm-evk.jinja2' %}

{% set device_type = 'imx8mm-evk' %}

{% set soft_reset_command = 'reboot' %}

{% set soft_reboot_command = 'reboot' %}

{% set connection_list = ['uart0'] %}

{% set connection_tags = {'uart0': ['primary', 'telnet']} %}

{% set connection_commands = {'uart0': 'telnet localhost 8007'} %}

{% set uboot_bootcmd = 'bootm 0x40480000' %}

{% set uuu_usb_otg_path = '3:2' %}

{% set uuu_corrupt_boot_media_command = ['mmc dev 1', 'mmc erase 0 0x400'] %}

{% set bootloader_prompt = 'u-boot=>' %}

{% set shutdown_message = 'Restarting system' %}

{% set power_off_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command off --port 15' %}

{% set hard_reset_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command reboot --port 15' %}

{% set power_on_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command on --port 15' %}

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 08 October 2020 10:13 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Le jeu. 8 oct. 2020 à 18:31, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

In the following line ‘uart0’ needs to be obtained from the worker where the target is connected or it is just a tag ?

{% set connection_list = ['uart0'] %}

This name is just an internal reference to indicate to lava that it should use "uart0" from the connection command:

{% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Also, as I have mentioned in another server I am not facing this issue even that target doesn’t have the connection commands in the device dictionary.

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 08 October 2020 09:52 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Hello,

this is due to a misconfiguration of your device. The device dictionary is missing the connection commands.

See https://staging.validation.linaro.org/scheduler/device/staging-black02/devic...

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Rgds

Le jeu. 8 oct. 2020 à 16:38, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Lava users,

I am getting “ Job error: Invalid job data: ['Unable to connect to shell - missing connections block.'] “ error while submitting jobs which is using ‘uuu’ deploy and boot method.

Same job I am using in a different server and there it is working perfectly. Both the servers are using same version.

Please check the attached job yaml file (uuu-job.yaml) and the job log (uuu-job-fail-log.txt).

Regards, Bhargav

---

Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users

--

Rémi Duraffort

LAVA Architect

Linaro

--

Rémi Duraffort

LAVA Architect

Linaro

Hello,

you are not specifying the connection_list for this specific device, only the connection_command. This is not enough for uuu that requires a connection_list.

Rgds

Le lun. 19 oct. 2020 à 15:51, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

Please check the attached rendered yaml.

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 19 October 2020 04:45 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Hello,

could you paste the device dictionary after the rendering? Click on "Rendered YAML" tab.

Rgds

Le mer. 14 oct. 2020 à 14:11, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

After adding these line in the device dictionary as you suggested I was able to successfully execute my job in a imx6 device

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

But now when I am trying to execute a similar job in imx8mmini device, I am again getting the same error

*Job error: Invalid job data: ['Unable to connect to shell - missing connections block.']*

Here is my device dictionary

{% extends 'imx8mm-evk.jinja2' %}

{% set device_type = 'imx8mm-evk' %}

{% set soft_reset_command = 'reboot' %}

{% set soft_reboot_command = 'reboot' %}

{% set connection_list = ['uart0'] %}

{% set connection_tags = {'uart0': ['primary', 'telnet']} %}

{% set connection_commands = {'uart0': 'telnet localhost 8007'} %}

{% set uboot_bootcmd = 'bootm 0x40480000' %}

{% set uuu_usb_otg_path = '3:2' %}

{% set uuu_corrupt_boot_media_command = ['mmc dev 1', 'mmc erase 0 0x400'] %}

{% set bootloader_prompt = 'u-boot=>' %}

{% set shutdown_message = 'Restarting system' %}

{% set power_off_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command off --port 15' %}

{% set hard_reset_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command reboot --port 15' %}

{% set power_on_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command on --port 15' %}

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 08 October 2020 10:13 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Le jeu. 8 oct. 2020 à 18:31, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

In the following line ‘uart0’ needs to be obtained from the worker where the target is connected or it is just a tag ?

{% set connection_list = ['uart0'] %}

This name is just an internal reference to indicate to lava that it should use "uart0" from the connection command:

{% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Also, as I have mentioned in another server I am not facing this issue even that target doesn’t have the connection commands in the device dictionary.

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 08 October 2020 09:52 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Hello,

this is due to a misconfiguration of your device. The device dictionary is missing the connection commands.

See https://staging.validation.linaro.org/scheduler/device/staging-black02/devic...

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Rgds

Le jeu. 8 oct. 2020 à 16:38, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Lava users,

I am getting “ Job error: Invalid job data: ['Unable to connect to shell - missing connections block.'] “ error while submitting jobs which is using ‘uuu’ deploy and boot method.

Same job I am using in a different server and there it is working perfectly. Both the servers are using same version.

Please check the attached job yaml file (uuu-job.yaml) and the job log (uuu-job-fail-log.txt).

Regards, Bhargav

---

Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users

--

Rémi Duraffort

LAVA Architect

Linaro

--

Rémi Duraffort

LAVA Architect

Linaro

--

Rémi Duraffort

LAVA Architect

Linaro

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Le mar. 20 oct. 2020 à 15:37, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

Can you point me to an example which is using the ‘connection_list’ parameter ?

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 20 October 2020 06:31 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Hello,

you are not specifying the connection_list for this specific device, only the connection_command. This is not enough for uuu that requires a connection_list.

Rgds

Le lun. 19 oct. 2020 à 15:51, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

Please check the attached rendered yaml.

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 19 October 2020 04:45 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Hello,

could you paste the device dictionary after the rendering? Click on "Rendered YAML" tab.

Rgds

Le mer. 14 oct. 2020 à 14:11, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

After adding these line in the device dictionary as you suggested I was able to successfully execute my job in a imx6 device

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

But now when I am trying to execute a similar job in imx8mmini device, I am again getting the same error

*Job error: Invalid job data: ['Unable to connect to shell - missing connections block.']*

Here is my device dictionary

{% extends 'imx8mm-evk.jinja2' %}

{% set device_type = 'imx8mm-evk' %}

{% set soft_reset_command = 'reboot' %}

{% set soft_reboot_command = 'reboot' %}

{% set connection_list = ['uart0'] %}

{% set connection_tags = {'uart0': ['primary', 'telnet']} %}

{% set connection_commands = {'uart0': 'telnet localhost 8007'} %}

{% set uboot_bootcmd = 'bootm 0x40480000' %}

{% set uuu_usb_otg_path = '3:2' %}

{% set uuu_corrupt_boot_media_command = ['mmc dev 1', 'mmc erase 0 0x400'] %}

{% set bootloader_prompt = 'u-boot=>' %}

{% set shutdown_message = 'Restarting system' %}

{% set power_off_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command off --port 15' %}

{% set hard_reset_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command reboot --port 15' %}

{% set power_on_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command on --port 15' %}

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 08 October 2020 10:13 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Le jeu. 8 oct. 2020 à 18:31, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Remi,

In the following line ‘uart0’ needs to be obtained from the worker where the target is connected or it is just a tag ?

{% set connection_list = ['uart0'] %}

This name is just an internal reference to indicate to lava that it should use "uart0" from the connection command:

{% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Also, as I have mentioned in another server I am not facing this issue even that target doesn’t have the connection commands in the device dictionary.

Regards,

Bhargav

*From:* Remi Duraffort [mailto:remi.duraffort@linaro.org] *Sent:* 08 October 2020 09:52 PM *To:* DAS, BHARGAV BHARGAV_DAS@mentor.com *Cc:* lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] Error while using uuu boot method

Hello,

this is due to a misconfiguration of your device. The device dictionary is missing the connection commands.

See https://staging.validation.linaro.org/scheduler/device/staging-black02/devic...

{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}

Rgds

Le jeu. 8 oct. 2020 à 16:38, DAS, BHARGAV BHARGAV_DAS@mentor.com a écrit :

Hi Lava users,

I am getting “ Job error: Invalid job data: ['Unable to connect to shell - missing connections block.'] “ error while submitting jobs which is using ‘uuu’ deploy and boot method.

Same job I am using in a different server and there it is working perfectly. Both the servers are using same version.

Please check the attached job yaml file (uuu-job.yaml) and the job log (uuu-job-fail-log.txt).

Regards, Bhargav

---

Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users

--

Rémi Duraffort

LAVA Architect

Linaro

--

Rémi Duraffort

LAVA Architect

Linaro

--

Rémi Duraffort

LAVA Architect

Linaro

--

Rémi Duraffort

LAVA Architect

Linaro