[Lava-users] correspondence between uboot manual commands and job definition script commands.

Neil Williams neil.williams at linaro.org
Tue Aug 28 07:15:21 UTC 2018


On Tue, 14 Aug 2018 at 12:18, ljh_dev <ljh_dev at 126.com> wrote:

> I have an important question neet to clarify.
> For exampe when I manunl boot kernel by uboot, once board startup  and
> into uboot interactive environment, I manual input follow command as:
>  setenv image  zImage_mx....
>  setenv nfsroot  /rootfs/rootfs001....
>  ...
> if I whan to dispatcher to boot the board kernel, I need write job
> definition,Is it written like this?:
>

Not in the test job, no. Those instructions need to be part of the
device-type Jinja2 configuration because the actual values will need to be
replaced with the temporary filepaths.



>  boot:
>    # list of boot methods which this device supports.
>    methods:
>      - u-boot:
>          parameters:
>          ...
>          oe:
>            commands:
>            - setenv image  zImage_mx....
>            - setenv nfsroot  /rootfs/rootfs001....
>
>
>
> _______________________________________________
> Lava-users mailing list
> Lava-users at lists.linaro.org
> https://lists.linaro.org/mailman/listinfo/lava-users
>


-- 

Neil Williams
=============
neil.williams at linaro.org
http://www.linux.codehelp.co.uk/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linaro.org/pipermail/lava-users/attachments/20180828/0d6e36e6/attachment.html>


More information about the Lava-users mailing list