On Wed, 28 Nov 2018 at 13:01, Manoj Tiwary manojtiwary22@gmail.com wrote:

Hi all,

When I try to run a test in lava , hacking session is not starting . it is exiting by showing:

You've missed the most important log line:

- {"dt": "2018-11-28T12:15:38.894678", "lvl": "target", "msg": "Starting network: Illegal instruction"}

This system is broken.

Using /lava-18 export SHELL=/bin/sh # export SHELL=/bin/sh /lava-18/bin/lava-test-runner /lava-18/0 /lava-18/bin/lava-test-runner /lava-18/0 Test shell timeout: 10s (minimum of the action and connection timeout) export SHELL=/bin/sh # /lava-18/bin/lava-test-runner /lava-18/0 Illegal instruction

That's your first problem. The booted device cannot execute simple shell instructions.

<LAVA_TEST_RUNNER EXIT> ok: lava_test_shell seems to have completed end: 3.1 lava-test-shell (duration 00:00:01) [common] end: 3 lava-test-retry (duration 00:00:01) [common] start: 4 finalize (timeout 00:10:00) [common] start: 4.1 power-off (timeout 00:00:05) [common] end: 4.1 power-off (duration 00:00:00) [common]

my board linux has busybox init system

Boot the board manually and make sure the init system can actually operate.

There's nothing special about lava-test-runner and this isn't about the hacking session, the test didn't get anywhere near that far.

Also, most busybox configurations don't support hacking sessions - you'll need to be careful to enable an SSH server (usually dropbear) and network support.

Please help me resolve the issue. I've attached the job log below.

Thanks & Regards, Manoj _______________________________________________ Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users