Sorry, but I didnt understand about what commands are you talking about?
Flash image via fastboot flash. And once I successfully did it. But my device has problem with fastboot reboot-bootloader(some times pass some times fails) and I want to remove fastboot reboot-bootloader. Communication with device via serial connection.
Ilya.
________________________________ From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 3:56:52 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
Your 'commands' section is missing entirely. You need either of: connection_command user_commands connection_list to add this section to the rendered dictionary. Without it default value will be used.
Beside that, how does LAVA interact with your device without connection_command?
milosz
On Thu, 5 Sep 2019 at 13:33, Ilya Fedusiv ilya.f@l4b-software.com wrote:
Rendered device. https://pastebin.com/BGMTi1SZ
I just change file, save it. Update web page. And it looks like that device description is updated.
Ilya ________________________________ From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 3:22:55 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
Than you're not changing it in the right place. How does the rendered device dictionary look like?
milosz
On Thu, 5 Sep 2019 at 13:20, Ilya Fedusiv ilya.f@l4b-software.com wrote:
No, result same. Lava still runs that command
nice fastboot -s 861a1c59 reboot-bootloader
From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 3:16:04 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
On Thu, 5 Sep 2019 at 13:13, Ilya Fedusiv ilya.f@l4b-software.com wrote:
It doesnt help. Maybe I made wrong description.
Device desc: https://pastebin.com/1uUw2shL
Try this: {% set soft_reboot_command = 'pwd' %}
milosz
Log: https://pastebin.com/ZyNbduP6
Ilya
From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 2:19:01 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
On Thu, 5 Sep 2019 at 10:16, Ilya Fedusiv ilya.f@l4b-software.com wrote:
Hi!
Lava as default at beginning runs that command:
nice fastboot -s 261a1c5d reboot-bootloader
This is coming from base-fastboot template {% set soft_reboot_command = soft_reboot_command|default('adb -s ' + fastboot_serial_number + ' reboot bootloader') %}
So to prevent it you need to set soft_reboot_command in your device dictionary.
milosz
Is it possible to avoid this step? Dont run this command
Ilya
Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users