Yes. At your job there is no that command.
Here is my job log:
right after validation section starts enter-fastboot-action. Why it could be? https://pastebin.com/Zg9cKM3X
Job desc : https://pastebin.com/ZMbCvxRv I dont use lxc.
Important part of device render: https://pastebin.com/snLj0Ma9
Ilya
________________________________ From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Monday, September 9, 2019 11:20 AM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
On Sun, 8 Sep 2019 at 14:49, Ilya Fedusiv ilya.f@l4b-software.com wrote:
Version is :
root@l4b:/# apt show lava-server Package: lava-server Version: 2019.09+stretch
I was looking into code and found that it looks like about fastboot reboot-booloader is hardcoded. https://github.com/Linaro/lava/blob/master/lava_dispatcher/actions/boot/fast...
This part is only executed at the end of the job, not at the beginning. See hikey job example: https://validation.linaro.org/scheduler/job/1933229#L3165
Anyway, this is hikey specific I believe and should be removed. Could you report a ticket in gitlab: https://git.lavasoftware.org/lava/lava
milosz
Ilya. ________________________________ From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 5:40 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
Hmm, that should work. soft_reboot_command is the only place where the 'reboot bootloader' shows up. Which version of LAVA do you run?
milosz
On Thu, 5 Sep 2019 at 15:04, Ilya Fedusiv ilya.f@l4b-software.com wrote:
Thank you! I'm trying to understand this connection part. If I understand correctly this is connection part https://github.com/Linaro/lava/blob/master/etc/dispatcher-config/device-type... ?
I edited device desc https://pastebin.com/ihzYZxVM
Am I on right way?
Job is still running fastboot reboot-bootloader command.
Ilya
From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 4:12:09 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
There is no "connection_command" anywhere in your device dictionary. Without it you're missing the whole 'commands' section. This means you're using default soft_reboot_command. Beside that without connection_command LAVA won't interact with your device - there won't be any device logs available in the job. It will also not know when the booting process finished. To put it simply - it won't work.
milosz
On Thu, 5 Sep 2019 at 14:07, Ilya Fedusiv ilya.f@l4b-software.com wrote:
Sorry, but I didnt understand about what commands are you talking about?
Flash image via fastboot flash. And once I successfully did it. But my device has problem with fastboot reboot-bootloader(some times pass some times fails) and I want to remove fastboot reboot-bootloader. Communication with device via serial connection.
Ilya.
From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 3:56:52 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
Your 'commands' section is missing entirely. You need either of: connection_command user_commands connection_list to add this section to the rendered dictionary. Without it default value will be used.
Beside that, how does LAVA interact with your device without connection_command?
milosz
On Thu, 5 Sep 2019 at 13:33, Ilya Fedusiv ilya.f@l4b-software.com wrote:
Rendered device. https://pastebin.com/BGMTi1SZ
I just change file, save it. Update web page. And it looks like that device description is updated.
Ilya ________________________________ From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 3:22:55 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
Than you're not changing it in the right place. How does the rendered device dictionary look like?
milosz
On Thu, 5 Sep 2019 at 13:20, Ilya Fedusiv ilya.f@l4b-software.com wrote:
No, result same. Lava still runs that command
nice fastboot -s 861a1c59 reboot-bootloader
From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 3:16:04 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
On Thu, 5 Sep 2019 at 13:13, Ilya Fedusiv ilya.f@l4b-software.com wrote:
It doesnt help. Maybe I made wrong description.
Device desc: https://pastebin.com/1uUw2shL
Try this: {% set soft_reboot_command = 'pwd' %}
milosz
Log: https://pastebin.com/ZyNbduP6
Ilya
From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Thursday, September 5, 2019 2:19:01 PM To: Ilya Fedusiv ilya.f@l4b-software.com Cc: lava-users@lists.lavasoftware.org lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Fastboot reboot-bootloader
On Thu, 5 Sep 2019 at 10:16, Ilya Fedusiv ilya.f@l4b-software.com wrote: > > Hi! > > Lava as default at beginning runs that command: > > nice fastboot -s 261a1c5d reboot-bootloader
This is coming from base-fastboot template {% set soft_reboot_command = soft_reboot_command|default('adb -s ' + fastboot_serial_number + ' reboot bootloader') %}
So to prevent it you need to set soft_reboot_command in your device dictionary.
milosz
> > > Is it possible to avoid this step? Dont run this command > > Ilya > > _______________________________________________ > Lava-users mailing list > Lava-users@lists.lavasoftware.org > https://lists.lavasoftware.org/mailman/listinfo/lava-users