On 20 February 2018 at 11:20, Zoran S zoran.stojsavljevic.de@gmail.com wrote:
Hello,
I am bringing now the target Beaglebone Black, as DUT in Lava.
Here is my BBB01.jinja2 device definition:
{% extends 'beaglebone-black.jinja2' %} {% set connection_command = '/vagrant/scripts/connectBBB.sh localhost 8020 root ""' %} {% set power_on_command = '/usr/bin/egctl egenie on left left left' %} {% set power_off_command = '/usr/bin/egctl egenie off left left left' %} {% set hard_reset_command = '/usr/bin/egctl egenie on left left left' %}
Where the line: "vagrant/scripts/connectBBB.sh localhost 8020 root ""'
represents as $@ the following: 127.0.0.1 8020 root and "" ("" represents empty password, actually <cr>).
What password? To connect to the serial port of the device? That looks wrong.
If a password is required to login to the booted system, that must be supplied in the test job definition using auto login action support.
It seems that this part works correctly:
end: 2.4.1 reset-device (duration 00:00:00) start: 2.4.2 u-boot-interrupt (timeout 00:03:00) Changing prompt to 'Press SPACE to abort autoboot' u-boot-interrupt: Wait for prompt Press SPACE to abort autoboot (timeout 00:03:00) spawn telnet localhost 8020 Trying ::1... Connected to localhost. Escape character is '^]'. ser2net port 8020 device /dev/ttyUSB0 [115200 N81] (Debian GNU/Linux)
end: 2.4.2 u-boot-interrupt (duration 00:00:02) start: 2.4.3 bootloader-commands (timeout 00:02:58) Changing prompt to start interaction: U-Boot bootloader-commands: Wait for prompt U-Boot (timeout 00:03:00)
Your U-Boot configuration did not issue a prompt, it immediately went into booting the board with whatever was last installed.
switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unable to read file boot.scr ** ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unable to read file boot.scr ** ** Unable to read file uEnv.txt ** 4161168 bytes read in 293 ms (13.5 MiB/s) 35016 bytes read in 23 ms (1.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff4000, end 8ffff8c7 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.8-jumpnow (oe-user@oe-host) (gcc version 7.2.0 (GCC)) #1 Fri Jan 12 13:27:03 CET 2018 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] CPU: All CPU(s) started in SVC mode.
But when it comes to login to kernel login, it fails!
It cannot login because it's trying to login to the wrong system - whatever was last installed, not the one specified in the test job. There are no TFTP operations here - that's a problem.
Starting OpenBSD Secure Shell server: sshd key_load_public: invalid format Could not load host key: /etc/ssh/ssh_host_rsa_key key_load_public: invalid format Could not load host key: /etc/ssh/ssh_host_dsa_key key_load_public: invalid format Could not load host key: /etc/ssh/ssh_host_ecdsa_key key_load_public: invalid format Could not load host key: /etc/ssh/ssh_host_ed25519_key sshd: no hostkeys available -- exiting. Starting rpcbind daemon...done. starting statd: done exportfs: can't open /etc/exports for reading modprobe: can't change directory to '/lib/modules': No such file or directory NFS daemon support not enabled in kernel Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 2.3.2 beaglebone /dev/ttyO0 beaglebone login: [ 170.488770] random: crng init done bootloader-commands timed out after 178 seconds end: 2.4.3 bootloader-commands (duration 00:02:58) uboot-retry failed: 1 of 1 attempts. 'bootloader-commands timed out after 178 seconds' bootloader-commands timed out after 178 seconds end: 2.4 uboot-retry (duration 00:03:00) uboot-action failed: 1 of 1 attempts. 'bootloader-commands timed out after 178 seconds' bootloader-commands timed out after 178 seconds end: 2 uboot-action (duration 00:03:00) Cleaning after the job Cleaning up download directory: /var/lib/lava/dispatcher/tmp/84/tftp-deploy-a0ZzPD/ramdisk Cleaning up download directory: /var/lib/lava/dispatcher/tmp/84/tftp-deploy-a0ZzPD/kernel Cleaning up download directory: /var/lib/lava/dispatcher/tmp/84/tftp-deploy-a0ZzPD/dtb Cleaning up download directory: /var/lib/lava/dispatcher/tmp/84/tftp-deploy-a0ZzPD/modules start: 4.1 power-off (timeout 00:00:05) nice /usr/bin/egctl egenie off left left left command output socket 1 - off socket 2 - off socket 3 - off socket 4 - off
It seems that empty character as "" in jinja2 is noit well represented (or maybe I need to have somehow <CR>)?!
Any advise too this problem?
Thank you, Zoran zo _______________________________________________ Lava-users mailing list Lava-users@lists.linaro.org https://lists.linaro.org/mailman/listinfo/lava-users