On Wed, 3 Oct 2018 at 15:46, Jeremy Stashluk StashlukJ@geophysical.com wrote:
The bootloader-commands step breaks into u-boot and begins to issue commands, but some commands are issued prior to receiving the prompt.
I’ve attempted changing the boot_char_delay, but it doesn’t solve the issue.
I’m getting symptoms much like the ones in this thread, except I’m sending space rather than a newline, so the fix is not relevant to me.
You've attached the job description - that's just used for unit tests. What is needed here is the test job submission - what you submit to LAVA to start the test job. That allows us to see what commands are actually being specified.
Also, compare your test job and output with https://lkft-staging.validation.linaro.org/scheduler/job/8724 which is a similar kind of test job.
We don't run U-Boot TFTP jobs on X15 - those test jobs are using fastboot which only requires sending a single command to U-Boot but does require LXC, so the jobs are more complex: https://staging.validation.linaro.org/scheduler/job/240825
To set a character delay between sending each character of each line during the boot action, add this to your device dictionary (in this example 30 milliseconds):
{% set boot_character_delay = 30 %}
Please also attach the device dictionary in the reply.
https://lists.linaro.org/pipermail/lava-users/2018-May/001069.html
Jeremy Stashluk
Embedded Software Engineer
Geophysical Survey Systems, Inc.
40 Simon Street • Nashua, NH 03060-3075
- 893.1109 main • 603.681.2045 direct • 603.889.3984 fax
stashlukj@geophysical.com • www.geophysical.com
Lava-users mailing list Lava-users@lists.linaro.org https://lists.linaro.org/mailman/listinfo/lava-users
