On Tue, 8 Jan 2019 at 19:36, Diego Russo Diego.Russo@arm.com wrote:
Hello LAVA mailing list,
I see RPI3 is supported by LAVA but unfortunately it doesn't fit Mbed Linux OS (MBL) case. Our build system produces a WIC image which can be written on the SD card directly (instructions here: https://os.mbed.com/docs/linux-os/v0.5/getting-started/writing-and-booting-t...). This is needed for two main reasons:
- MBL has its own booting flow
- MBL expects a partition layout (not only the rootfs) with multiple partitions in order to work.
What's the best way to automate the deployment on MBL on RPI3 via LAVA in order to run our tests?
I'd say there isn't any if you can't deliver your software to the board without manual operation (preparing SD card using host PC). You could try some sort of SDMux (for example this: https://wiki.tizen.org/MuxPi or this: https://wiki.tizen.org/SDWire) but from my experience they don't work. I didn't check them with RPi though, so there is some small chance of success :)
milosz
Cheers
-- Diego Russo | Staff Software Engineer | Mbed Linux OS ARM Ltd. CPC1, Capital Park, Cambridge Road, Fulbourn, CB21 5XE, United Kingdom http://www.diegor.co.uk - https://os.mbed.com/linux-os/
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users