Hi Andrei,
Wonderful!!, Thanks for your time .. I need bit support from you, don't mine :) ,Can you please share your Jink scripts. I will use these as a reference will write comparable boot method for trace32 .
And if you can, Please share the appropriate Doc (link) to setup(interface) other software's in Lava server. Setup Jlink with Lava server also fine.
Regards Nagendra S
On Mon, Apr 27, 2020 at 2:10 PM Andrei Gansari andrei.gansari@nxp.com wrote:
Hello Nagendra,
JLink was added as most NXP mcus use this interface, there is no support for T32 in Lava as far as I know.
Even if they use the same JTAG interface standard, Segger and Lauterbach use different hardware and software to interact.
I’ve used JLinkExe command line software (from Segger) to control the debugger, in the case of T32 you will probably need to use Lauterbach’s Trace32 command line software + scripts, such as: https://stackoverflow.com/questions/24883140/controlling-trace32-via-command...
Haven’t used Trace32 GUI software for some years, never used the command line.
You can probably create a flashing script starting form JLink scripts, you need to:
- setup trace32 software on your Lava server
- learn how to use the command to flash your board using a cmm script
- change JLink scripts with T32 commands and cmm script generation
- pull request your changes so others can benefit 😊
Andrei Gansari
*From:* Lava-users lava-users-bounces@lists.lavasoftware.org *On Behalf Of *Nagendra Singamsetti *Sent:* Saturday, April 25, 2020 9:05 AM *To:* Kumar Gala kumar.gala@linaro.org; andrei.gansari@linaro.org *Cc:* lava-users@lists.lavasoftware.org *Subject:* [EXT] [Lava-users] Test jobs to boot the targets through trace32
*Caution: *EXT Email
Hi Kumar, Andrei
From the previous lava- mailing list i have seen that you people addressed jlink debugger information as like this :
*On Thu, Jan 23, 2020 at 7:33 PM Andrei Gansari <andrei.gansari at nxp.com https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.lavasoftware.org%2Fmailman%2Flistinfo%2Flava-users&data=02%7C01%7Candrei.gansari%40nxp.com%7C83245e67e70541a2a75208d7e8deda4e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637233916182670754&sdata=t%2Fkuf2RG5RJmbil521DTkfBG1x8rQKfD%2FY2RHeZ3oJw%3D&reserved=0>*
- wrote:*
- From the screenshot it looks like you have a version of LAVA that does*
- not support jlink boot method.*
- JLink was added in version 2019.10-1*
- On Tue, Nov 26, 2019 at 2:36 PM Andrei Gansari <andrei.gansari at nxp.com https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.lavasoftware.org%2Fmailman%2Flistinfo%2Flava-users&data=02%7C01%7Candrei.gansari%40nxp.com%7C83245e67e70541a2a75208d7e8deda4e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637233916182670754&sdata=t%2Fkuf2RG5RJmbil521DTkfBG1x8rQKfD%2FY2RHeZ3oJw%3D&reserved=0>*
- wrote:*
- I’ve tested lava+jlink on Cortex M with both onboard debugger and*
- external debugger, like the one you referenced.*
- You should change the following if needed:*
- address:*
- *0x00000000**
- options:*
- '-device *MK64FN1M0xxx12'**
- '-if SWD'*
- '-speed 4000'*
Can you please let me know, whether the latest lava version can support trace32 boot method instead jlink/cmsis-dac. trace32 debugger tool is designed by lauterbach and it is licensed one.
I am bit afraid whether this support is available from lava server or not as Jlink support added recently.
https://www2.lauterbach.com/pdf/app_t32start.pdf https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww2.lauterbach.com%2Fpdf%2Fapp_t32start.pdf&data=02%7C01%7Candrei.gansari%40nxp.com%7C83245e67e70541a2a75208d7e8deda4e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637233916182680760&sdata=P8gRMcoHdEYtIJh0rBPGGCiJLMjWvYBE51Wa%2FhHBZ7I%3D&reserved=0
We need trace32 debugger support as we are using cortex-M55 processor operations over here.
I am looking forward your kind support
thanks
Regards
Nagendra S