lava-users June 2018

lava-users@lists.lavasoftware.org

10 participants
16 discussions

by Tim Jaacks

Hello everyone, I have two cases in which I need to reboot my device during tests: 1. Reboot is active part of the test (e.g. store some persistent settings, reboot, check if persistent settings are correctly loaded after reboot) 2. Reboot is triggered and has to be evaluated (e.g. activate watchdog, stop resetting it, wait, check if system reboots automatically) How can I hadle these two cases in LAVA? Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Tempowerkring 2 21079 Hamburg Direct: +49 40 791 899 - 55 Fax: +49 40 791899 - 39 tim.jaacks(a)garz-fricke.com www.garz-fricke.com<http://www.garz-fricke.com/> SOLUTIONS THAT COMPLETE! [cid:image001.jpg@01D407D7.E4232AA0] Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz

5 years, 10 months

Re: [Lava-users] [Lava-announce] 2018.5.post1 Security hot fix

by Remi Duraffort

Dear users, the corresponding CVEs has been assigned: * https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12563 * https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12564 * https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12565 Regards 2018-06-15 23:29 GMT+02:00 Neil Williams <neil.williams(a)linaro.org>: > 2018.5.post1 > ============ > > During routine development, a new security scanning tool (bandit) was used > on the LAVA codebase. Three security problems were found relating to the > Job Submit UI and the loading of YAML files through XMLRPC. The problems > date back to 2013, possibly earlier, so all releases of LAVA are affected. > > Fixes were developed and have now been released. > > https://review.linaro.org/#/c/25917/ Remove the ability to paste > URLs in the submit page > > https://review.linaro.org/25918 Use requests instead of urlopen > > https://review.linaro.org/25919 Use yaml.safe_load when parsing > user data > > Thanks to Remi Duraffort for identifying and fixing the issues. > > Note: These changes are not trivial to backport to previous releases. It > is possible but some familiarity with the codebase will be required. We > have packed a lot of changes into the time since the end of the migration > and we are hoping to have a more stable time ahead. The LAVA software team > recommend that all instances look to upgrade to 2018.5.post1. Our apologies > for these problems. > > We are NOT aware of any exploits using these issues but now that the > problems are public, it is prudent to apply the available fixes before > anything happens. > > We expect to make more use of bandit and similar tools in future. > > CVE's have been requested but we don't have the CVE numbers back at this > time. > > The production repo now carries these changes as 2018.5.post1-1+stretch > > An upload to Debian unstable will follow in due course. (The Debian > security team were notified once we had a fix.) An upload to Debian > Stretch to update 2016.12-1 is being prepared. > > -- > > Neil Williams > ============= > neil.williams(a)linaro.org > http://www.linux.codehelp.co.uk/ > > _______________________________________________ > Lava-announce mailing list > Lava-announce(a)lists.linaro.org > https://lists.linaro.org/mailman/listinfo/lava-announce > > -- Rémi Duraffort LAVA Team

5 years, 10 months

question about result parse pattern in monitor action

by Chase Qi

Hi, To match the result lines in the following log from zephyr sanity test: — output — ***** Booting Zephyr OS v1.11.0-1194-g4b0b65c1b ***** Running test suite poll_api =================================================================== starting test - test_poll_no_wait PASS - test_poll_no_wait =================================================================== starting test - test_poll_wait PASS - test_poll_wait =================================================================== starting test - test_poll_multi PASS - test_poll_multi =================================================================== =================================================================== — output ends — I started with this pattern: '(?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+)', but the test_case_ids it matched are incomplete, shown as below. Refer to https://validation.linaro.org/scheduler/job/1807112 test_po test_poll_ test_poll_mu I also tried the following patterns, but no lucky. '(?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+)$’ matched sth similar as above, but the not the same. Refer to https://validation.linaro.org/scheduler/job/1807117 '(?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+)\n’ didn’t match anything. A search online hit https://stackoverflow.com/questions/14689531/how-to-match-a-new-line-charac… . Then I tried manually in python shell. '(?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+)’ works, '(?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+)$’ works only when re.M enabled. — debug — >>> s "\nTrying ::1...\nConnected to localhost.\nEscape character is '^]'.\nFRDM-KW41Z-01 7113 [115200 N81]\n***** Booting Zephyr OS v1.11.0-1194-g4b0b65c1b *****\nRunning test suite poll_api\n===================================================================\nstarting test - test_poll_no_wait\nPASS - test_poll_no_wait\n===================================================================\nstarting test - test_poll_wait\nPASS - test_poll_wait\n===================================================================\nstarting test - test_poll_multi\nPASS - test_poll_multi\n===================================================================\n===================================================================\n" >>> p.search(s).group() 'PASS - test_poll_no_wait' >>> p = re.compile(r'(?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+)$') >>> p.search(s).group() Traceback (most recent call last): File "<stdin>", line 1, in <module> AttributeError: 'NoneType' object has no attribute 'group' >>> p = re.compile(r'(?P<result>(PASS|FAIL))\s-\s(?P<test_case_id>\w+)$', re.M) >>> p.search(s).group() 'PASS - test_poll_no_wait’ — ends — Could you please advise me how to handle the parsing with the monitor action? Thanks, Chase

5 years, 10 months

lavaserver Database

by Conrad Djedjebi

Good morning everyone, I would like to know if the default password for lavaserver database created in Postgresql is available somewhere in the default configuration files? Also, Is there a way to find out the default password for lavaserver user in the host? regards,

5 years, 10 months

NFS mount failures on Debian stretch

by Matt Hart

Hi all, For the boards I am using in my LAVA lab, if I try an NFS job on my jetson-tk1, it fails to mount the filesystem from the debian installed NFS server. http://lava.streamtester.net/scheduler/job/120050 my nfs-kernel-server version is 1:1.3.4-2.1, which was installed with LAVA from Debian Stretch. If I add 'vers=3' to the kernel NFS command line, it mounts the filesystem successfully. http://lava.streamtester.net/scheduler/job/120049 This is being discussed here to make it a default option https://review.linaro.org/#/c/25666/ But really this does seem like there's an issue with the NFS kernel server in Debian Stretch. Has anyone else had this issue? Matt

5 years, 10 months

u-boot devices broken after 2018.4 upgrade, strange u-boot interaction

by Kevin Hilman

Hello, After upgrading to 2018.4 (also tried .5) many of our device-types using base-uboot.jinja2 are broken. While I really like the major improvement to run commands individually, there seems to be some problems and the LAVA output logs are very confusing, showing concatenated strings, etc. Here is an example for an upstream device-type (meson-gxbb-p200), and here is where it starts interacting with u-boot: http://khilman.ddns.net/scheduler/job/15#L336 The "Parsed boot commands" look perfect, and all the commands in black all look good, but notice the commands at the u-boot prompt, they appear to be concatenated, starting right away at the "setenv initrd_high ..." However, observing the commands on the actual serial port (I use conmux, so can observe the serial console interactions directly), I'm not seeing concatenated strings, but the "setenv serverip ..." never shows up, so the TFTP downloads fail, and the job fails. Here's what I see directly on the serial console: Hit Enter or space or Ctrl+C key to stop autoboot -- : 0 gxb_p200_v1# gxb_p200_v1#setenv autoload no gxb_p200_v1#setenv initrd_high 0xffffffff gxb_p200_v1#setenv fdt_high 0xffffffff gxb_p200_v1#dhcp dwmac.c9410000 Waiting for PHY auto negotiation to complete.. done Speed: 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.0.216 (267 ms) gxb_p200_v1#tftp 0x1080000 14/tftp-deploy-5v1wo7fv/kernel/uImage Speed: 100, full duplex Using dwmac.c9410000 device TFTP from server 192.168.0.1; our IP address is 192.168.0.216 Filename '14/tftp-deploy-5v1wo7fv/kernel/uImage'. Load address: 0x1080000 Loading: * TFTP error: 'File not found' (1) Even more interesting is that on the same setup, a beaglebone-black device, using the same base-uboot.jinja2 is working just fine: http://khilman.ddns.net/scheduler/job/1 Any help would be appreciated, I'm thoroughly confused by what's going on here. Thanks, Kevin

5 years, 10 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lava-users June 2018