Hi Andrei , Hi Kumar,
Can you please share some of the Test Job definition references to check the Jlink-based test jobs configurations.
Thanks & Regards, Dhanunjaya. P
On Tue, Nov 26, 2019 at 2:36 PM Andrei Gansari andrei.gansari@nxp.com wrote:
I’ve tested lava+jlink on Cortex M with both onboard debugger and external debugger, like the one you referenced.
You should change the following if needed:
address:
*0x00000000*
options:
'-device *MK64FN1M0xxx12'*
'-if SWD'
'-speed 4000'
The interface SWD is supported, not JTAG, that can be easily changed if you need to.
Regards,
Andrei
*From:* Lava-users lava-users-bounces@lists.lavasoftware.org *On Behalf Of *dhanu msys *Sent:* Tuesday, November 26, 2019 7:49 AM *To:* Kumar Gala kumar.gala@linaro.org *Cc:* Andrei Gansari andrei.gansari@linaro.org; lava-users < lava-users@lists.lavasoftware.org> *Subject:* [EXT] Re: [Lava-users] Test jobs to boot the target through JLink
*Caution: *EXT Email
Hi Kumar,
Thanks for sharing the reference.
It's better to have some references for the test jobs submission also.
Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.
Here I have provided the JLink Interface , which we are going to use for the development.
https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thingbits.net%2Fproducts%2Fsegger-j-link-base-jtag-swd-debugger%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26gclid%3DCjwKCAiAlO7uBRANEiwA_vXQ-5LfXaVZ19mdNVQKMTOJJEXE6SCTlQl2y1ToYL7E06ebBwaEOUdy9xoC7W4QAvD_BwE&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=CfJeEKhiueckVp%2BktqM1a03ifAmEEbPQNFHv%2FFCFU3Q%3D&reserved=0
Regards,
Dhanunjaya. P
On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala kumar.gala@linaro.org wrote:
On Nov 21, 2019, at 11:06 PM, dhanu msys dhanuskd.palnati@gmail.com
wrote:
Hi Team,
Can you please share some reference test jobs to run the tests using
J-Link boot method.
Here’s a reference to the board cfg side change for J-Link:
https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fagansari%2Flite-lava%2Fblob%2F35a5bcbc01780638e6fd5e126bdfe18098c4ae77%2Flava_scheduler_app%2Ftests%2Fdevice-types%2Ffrdm-k64f.jinja2&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=4mRnDcD0%2FqaCYVqAEGQcMwRfCGJpr1nR8cmyzsBF%2FJ4%3D&reserved=0
Andrei,
Did you have a test job example to go along with this?
- k