That's right, at first I used following command and there was some output to the terminal iozone $OPT -f /mnt_emmc/tmp/iozone.tmp | tee result.log
But now I redirect output iozone $OPT -f /mnt_emmc/tmp/iozone.tmp > iozone.log 2>&1 performance are better but remain not homogeneous with Lava
Florence
-----Original Message----- From: Steve McIntyre [mailto:steve.mcintyre@linaro.org] Sent: vendredi 26 janvier 2018 14:43 To: Florence ROUGER JUNG florence.rouger-jung@st.com Cc: Remi Duraffort remi.duraffort@linaro.org; Neil Williams neil.williams@linaro.org; lava-users@lists.linaro.org Subject: Re: [Lava-users] IOZone test to measure performance of DUT
On Fri, Jan 26, 2018 at 11:12:54AM +0000, Florence ROUGER JUNG wrote:
Hello,
I use same environment for both tests, flashed board on SDCard, boot from SDCard and then mounted EMMC to execute iozone command
Florence
Hmmm, OK. Does iozone print a lot of output to the terminal as it runs, maybe?
Cheers,