New subject: [Lava-users] None of the deployment strategies accepted your deployment parameters

13 Nov 2019


      Hi Milosz,
Thanks for providing the document references.
I will try my level best.
Thanks & Regards,
Dhanunjaya
On Tue, Nov 12, 2019, 20:36 Milosz Wasilewski milosz.wasilewski@linaro.org
wrote:
...
I'll defer you to the docs:

boot commands:

https://master.lavasoftware.org/static/docs/v2/actions-boot.html#index-9

device type:

https://master.lavasoftware.org/static/docs/v2/devicetypes.html#device-types

u-boot bootloader:

https://master.lavasoftware.org/static/docs/v2/actions-boot.html#index-35
I didn't test tftp booting with this board, so I can't help. It should
work as this is supported in device type:
https://git.lavasoftware.org/lava/lava/blob/master/etc/dispatcher-config/dev...
Good luck.
milosz
On Tue, 12 Nov 2019 at 13:59, dhanu msys dhanuskd.palnati@gmail.com
wrote:
...
Hi Milosz,
I was running tftp on my localhost & kept those uImage & dtb files in
the "tftpboot" repository. PFA.
...
Thanks & Regards,
Dhanunjaya. P
On Tue, Nov 12, 2019 at 7:23 PM dhanu msys dhanuskd.palnati@gmail.com
wrote:
...
...
Hi Milosz,
Yes , I have booted my board manually using the tftp , here i have
attached those uImage & dtb images. PFA.
...
...
Once the device bootsup , through command prompt , i will set the
following commands.
...
...
setenv ipaddr 192.168.1.201
setenv gatewayip 192.168.1.200
setenv serverip 192.168.1.200
setenv netmask 255.255.255.0
tftpboot 0xc2000000 uImage
tftpboot 0xc4000000 stm32mp157c-ev1.dtb
setenv bootargs 'root=/dev/mmcblk0p6 rootwait rw
console=ttySTM0,115200'bootm 0xc2000000 - 0xc4000000
...
...
Its basically ARM architecture based and bootloader "u-boot".
Can you please suggest how i can deploy the tftp files through LAVA
test job ,what will be the url i need pass in the job definition ?
...
...
Thanks & Regards,
Dhanunjaya. P
On Tue, Nov 12, 2019 at 7:07 PM Milosz Wasilewski <
milosz.wasilewski@linaro.org> wrote:
...
...
...
Hmm,
Do you know how tftp boot works? Loading 100M tarball into memory
doesn't seem like a good idea. Which bootloader is running on your
board?
milosz
On Tue, 12 Nov 2019 at 13:32, dhanu msys dhanuskd.palnati@gmail.com
wrote:
...
...
...
...
Hi Milosz,
As per earlier email , I am trying to boot the STM32mp157c-dk2 with
the tftp deploy method , but getting failed to have proper device
configuration.
...
...
...
...
Here I have attached the device configuration , device template &
Job definition files. PFA.
...
...
...
...
Please let me know how to get resolve the issue.
Regards,
Dhanunjaya. P
On Tue, Nov 12, 2019 at 2:45 PM Milosz Wasilewski <
milosz.wasilewski@linaro.org> wrote:
...
...
...
...
...
On Tue, 12 Nov 2019 at 08:14, dhanu msys <
dhanuskd.palnati@gmail.com> wrote:
...
...
...
...
...
>
> Hi Milosz,
>
> Currently eth008 was unavailable,  Is there any possibility to
make use of Raspberry pi 4 as PDU to run power control commands on
STM32mp157c-dk2 ?
...
...
...
...
...
Sure. Anything that can drive a relay will work. You will need to
create a script that LAVA can call. Eth008 is a good choice for a
bigger LAB where you need a lot of relays (these boards have
configurable MAC addresses). If you need just one, than pick any
relay
...
...
...
...
...
you can get on ebay and that will do the trick.
milosz
>
> Thanks in advance.
>
> Regards,
> Dhanunjaya. P
>
>
> On Mon, Nov 11, 2019 at 5:36 PM dhanu msys <
dhanuskd.palnati@gmail.com> wrote:
...
...
...
...
...
>>
>> Hi Milosz,
>>
>> Thanks for the reply.
>>
>> I will try to get the eth008 if possible , otherwise i will try
to make use of TFTP or u-boot methods to run the test job on
STM32mp157c-dk2.
...
...
...
...
...
>>
>> Thanks & Regards,
>> Dhanunjaya. P
>>
>>
>> On Mon, Nov 11, 2019 at 4:57 PM Milosz Wasilewski <
milosz.wasilewski@linaro.org> wrote:
...
...
...
...
...
>>>
>>> On Mon, 11 Nov 2019 at 11:07, dhanu msys <
dhanuskd.palnati@gmail.com> wrote:
...
...
...
...
...
>>> >
>>> > Hi Milosz,
>>> >
>>> > Really Thanks for sharing the Information.
>>> >
>>> > I have basic question, we can't able to run any test job for
the STM32 without external hardware(PDU) ?
...
...
...
...
...
>>> >
>>> > Can you please share the device configuration , which helps
to run the test jobs without "ethernet controlled relay" for the STM32.
...
...
...
...
...
>>>
>>>
https://git.linaro.org/lava/lava-lab.git/tree/shared/lab-scripts/eth008_cont...
...
...
...
...
...
>>>
>>> >
>>> > As I requested earlier , is there any possibility to run the
STM32 specific jobs with any other deployment methods(tmpfs , tftp..etc).
...
...
...
...
...
>>>
>>> Our boards use EFI for booting and I never tried tftp with
that. You
...
...
...
...
...
>>> might need grub EFI application for that. Alternatively you
might use
...
...
...
...
...
>>> u-boot. I didn't try that either.
>>>
>>> milosz
>>>
>>> >
>>> > Thanks & Regards,
>>> > Dhanunjaya. P
>>> >
>>> >
>>> > On Mon, Nov 11, 2019 at 4:19 PM Milosz Wasilewski <
milosz.wasilewski@linaro.org> wrote:
...
...
...
...
...
>>> >>
>>> >> Well, LAVA will try to switch the device into DFU mode for
deployment
...
...
...
...
...
>>> >> step. These lines in the device dict do it:
>>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 1
-s on',
...
...
...
...
...
>>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 2
-s on',
...
...
...
...
...
>>> >> Then it will power on the board:
>>> >> '/usr/local/lab-scripts/snmp_pdu_control --hostname lngpdu01
--command
...
...
...
...
...
>>> >> on --port 3 --delay 20',
>>> >> After that it will try to flash it using the
STM32_Programmer_CLI:
...
...
...
...
...
>>> >> '/usr/local/bin/STM32_Programmer_CLI -c port=usb1 -w
{LAYOUT} -q',
...
...
...
...
...
>>> >> Lastly it will power the board down and flip the dip
switches back:
...
...
...
...
...
>>> >> '/usr/local/lab-scripts/snmp_pdu_control --hostname lngpdu01
--command
...
...
...
...
...
>>> >> off --port 3',
>>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 1
-s off',
...
...
...
...
...
>>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 2
-s off',
...
...
...
...
...
>>> >>
>>> >> So if you don't have HW moded board, this device dict won't
work for
...
...
...
...
...
>>> >> you. Sources for the scripts are here:
>>> >>
https://git.linaro.org/lava/lava-lab.git/tree/shared/lab-scripts
...
...
...
...
...
>>> >> We're using pretty expensive HW in the LAB:
>>> >>  - managed APC PDUs:
>>> >>
https://www.apc.com/shop/uk/en/products/Rack-PDU-Switched-1U-16A-208-230V-8-...
...
...
...
...
...
>>> >> (I couldn't find the exact models we have, they're
discontinued)
...
...
...
...
...
>>> >>  - ETH008 relay board:
https://www.robot-electronics.co.uk/htm/eth008tech.htm
...
...
...
...
...
>>> >>
>>> >> milosz
>>> >>
>>> >> On Mon, 11 Nov 2019 at 10:42, dhanu msys <
dhanuskd.palnati@gmail.com> wrote:
...
...
...
...
...
>>> >> >
>>> >> > Hi Milosz,
>>> >> >
>>> >> > No.
>>> >> > Through Manual Setup , we are able to switch between the
modes.
...
...
...
...
...
>>> >> >
>>> >> > Here I have attached the kernel & dtb image for your
reference. PFA.
...
...
...
...
...
>>> >> >
>>> >> > Dhanunjaya. P
>>> >> >
>>> >> >
>>> >> > On Mon, Nov 11, 2019 at 3:40 PM Milosz Wasilewski <
milosz.wasilewski@linaro.org> wrote:
...
...
...
...
...
>>> >> >>
>>> >> >> I think I forgot to ask key question when it comes to
this device: did
...
...
...
...
...
>>> >> >> you do the HW mod to be able to switch between DFU and OS
boot modes
...
...
...
...
...
>>> >> >> without manual step?
>>> >> >>
>>> >> >> milosz
>>> >> >>
>>> >> >> On Mon, 11 Nov 2019 at 10:01, dhanu msys <
dhanuskd.palnati@gmail.com> wrote:
...
...
...
...
...
>>> >> >> >
>>> >> >> > Hi Milosz,
>>> >> >> >
>>> >> >> > Thanks for reply.
>>> >> >> >
>>> >> >> > I am new to the LAVA usage.
>>> >> >> >
>>> >> >> > I have taken reference from the below link.
>>> >> >> >
https://staging.validation.linaro.org/scheduler/device/staging-stm32mp157-01...
...
...
...
...
...
>>> >> >> >
>>> >> >> > Here I have attached the device_dictionary & device
configurations files, PFA.
...
...
...
...
...
>>> >> >> >
>>> >> >> > Note : I am not able to see the "lab-scripts" to have
power controlled commands in my local repository , is there any specific
package need to install in my localhost , can you please share the
lab-scripts to have pdu control and also please share the pdu device
details if required to connect with the hardware.
...
...
...
...
...
>>> >> >> >
>>> >> >> > Can you please share some references , which i can run
some jobs through any other deploy methods like "tmpfs , tftp " for
"STM32MP157C-DK2".
...
...
...
...
...
>>> >> >> >
>>> >> >> > Thanks & Regards,
>>> >> >> > Dhanunjaya. P
>>> >> >> >
>>> >> >> >
>>> >> >> > On Mon, Nov 11, 2019 at 2:59 PM Milosz Wasilewski <
milosz.wasilewski@linaro.org> wrote:
...
...
...
...
...
>>> >> >> >>
>>> >> >> >> Could you share your device dictionary? You might be
missing
...
...
...
...
...
>>> >> >> >> flasher_deploy_commands.
>>> >> >> >>
>>> >> >> >> Please check here for reference:
>>> >> >> >>
https://ledge.validation.linaro.org/scheduler/device/lng-stm32mp157-01/devic...
...
...
...
...
...
>>> >> >> >>
>>> >> >> >> milosz
>>> >> >> >>
>>> >> >> >> On Thu, 7 Nov 2019 at 07:48, dhanu msys <
dhanuskd.palnati@gmail.com> wrote:
...
...
...
...
...
>>> >> >> >> >
>>> >> >> >> > Hi Team,
>>> >> >> >> >
>>> >> >> >> > I am trying to run the test_jobs on the specific
device type "stm32mp1157c-dk2" , but its throwing an error message to
deploy "flasher" method in the deployment parameters.
...
...
...
...
...
>>> >> >> >> >
>>> >> >> >> > Here I have attached the screenshots for reference.
PFA.
...
...
...
...
...
>>> >> >> >> >
>>> >> >> >> > Thanks & Regards,
>>> >> >> >> > Dhanunjaya. P
>>> >> >> >> > _______________________________________________
>>> >> >> >> > Lava-users mailing list
>>> >> >> >> > Lava-users@lists.lavasoftware.org
>>> >> >> >> >
https://lists.lavasoftware.org/mailman/listinfo/lava-users

Re: [Lava-users] None of the deployment strategies accepted your deployment parameters