Hello,
we are trying to add external interfaces on the worker to connect with the DUTs, for example a 4-port USB-to-RS232 converter. Our DUTs have multiple RS232 ports which shall be tested using this remote interface. We have already figured out how to integrate this hardware into the LAVA environment, so that it can be used within the LAVA LXC (using static_info in the device dictionary, resulting in the four /dev/ttyUSB* devices being visible there).
First question: We need multiple of these converters attached to the worker. How do we integrate these into LAVA? They all have the same board_id, vendor_id and product_id. If I specify the board_id in the device dictionary multiple times, the device is still added only once.
Second question: We need a way to specify to which of the /dev/ttyUSB* ports a certain RS232 port of the DUT is connected. The place where I would assume to put such information is the device dictionary. But how can we access this information within a LAVA test shell?
The documentation specifies some similar mechanism for energy probes:
https://validation.linaro.org/static/docs/v2/admin-lxc-deploy.html?highlight...
It says "Devices which are not directly attached to the worker can also be supported, for example energy probes which communicate over the network". As far as I can tell from the code, though, this seems to be a hard-coded feature without any possibility of adding other custom hardware. Is that correct?
If yes, why isn't there a generic mechanism to supply static_info from the device dictionary in the LAVA test shell? Or is there?
How can we implement our scenario described above using LAVA?
Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Tempowerkring 2 21079 Hamburg Direct: +49 40 791 899 - 55 Fax: +49 40 791899 - 39 tim.jaacks@garz-fricke.com www.garz-fricke.com WE MAKE IT YOURS!
Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz, Marc-Michael Braun