Hello Denis,
in the timeouts dictionary, you can specify a connections dictionary.
So something like this should work: timeouts: connections: overlay-unpack: minutes: 10
See https://docs.lavasoftware.org/lava/actions-timeout.html#connection-timeout
Le mer. 24 juil. 2019 à 14:30, Denis HUMEAU denis.humeau@st.com a écrit :
Hi Rémi,
Where do you set a connection timeout? In the job, in the device description?
I didn’t find anything explicit in LAVA help.
Denis
*From:* Remi Duraffort remi.duraffort@linaro.org *Sent:* mercredi 24 juillet 2019 14:23 *To:* Denis HUMEAU denis.humeau@st.com *Cc:* Lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] overlay-unpack timeout error
Hello Denis,
have you tried settings the connection timeout? IIRC lava is expecting the board to send something and will timeout if not receiving anything during "connection timeout" seconds.
Rgds
Le mar. 23 juil. 2019 à 08:58, Denis HUMEAU denis.humeau@st.com a écrit :
Hello Rémi,
Here is a plain log corresponding to the case described by Philippe.
Let me know if you need more.
Denis
*From:* Lava-users lava-users-bounces@lists.lavasoftware.org *On Behalf Of *Remi Duraffort *Sent:* lundi 22 juillet 2019 17:42 *To:* Philippe BEGNIC philippe.begnic@st.com *Cc:* Lava-users@lists.lavasoftware.org *Subject:* Re: [Lava-users] overlay-unpack timeout error
Hello Philippe,
could you send the raw logs?
Rgds
Le ven. 19 juil. 2019 à 09:34, Philippe BEGNIC philippe.begnic@st.com a écrit :
Hello everyone,
I have got an error in a lava job during to overlay unpacking operations.
This happen with jobs that flash the DUT before executing the tests. When the partitions are flashed on the DUT, I reboot the boards.
After kernel has started, the kernel boot prompt is detected. Then the commands to downloads the tests overlay are launched. ( wget ... )
But in my case, these commands are not immediately executed, because the DUT is beeing resizing the root filesystem to fit available disk space
on the SDCard.
This operation take time ( depending on capacity and characteristics of the SDCard), and cause overlay-unpack https://citools.st.com/results/testcase/2039053 to fail with a timeout error,
because the command wget is not executed in the expected time ( 30 sec is the default time ).
I have tried to add a time out settings in the transfer_overlay part of my jobs, but this has no effect.
Is it possible to set specific "timeout trigger" for the "overlay-unpack" operation ?
My Lava version: *2019.01+stretch*
Best regards
Philippe Begnic
STMicroelectronics
Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users
--
Rémi Duraffort
LAVA Team, Linaro
--
Rémi Duraffort
LAVA Team, Linaro