Test jobs to boot the target through JLink

List overview All Threads
Download

newer

older

Device node in LXC is not...

Creating a multinode job

dhanu msys

22 Nov 2019 22 Nov '19

6:06 p.m.

Hi Team,

Can you please share some reference test jobs to run the tests using J-Link boot method.

Thanks & Regards, Dhanunjaya. P

Attachments:

attachment.html (text/html — 329 bytes)

Show replies by thread

Kumar Gala

24 Nov 24 Nov

5:06 a.m.

New subject: [Lava-users] Test jobs to boot the target through JLink

...

On Nov 21, 2019, at 11:06 PM, dhanu msys dhanuskd.palnati@gmail.com wrote:

Hi Team,

Can you please share some reference test jobs to run the tests using J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809...

Andrei,

Did you have a test job example to go along with this?

- k

dhanu msys

26 Nov 26 Nov

6:48 p.m.

New subject: [Lava-users] Test jobs to boot the target through JLink

Hi Kumar,

Thanks for sharing the reference.

It's better to have some references for the test jobs submission also.

Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.

Here I have provided the JLink Interface , which we are going to use for the development.

https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_...

Regards, Dhanunjaya. P

On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala kumar.gala@linaro.org wrote:

...

...
On Nov 21, 2019, at 11:06 PM, dhanu msys dhanuskd.palnati@gmail.com

wrote:

...
Hi Team,

Can you please share some reference test jobs to run the tests using

J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809...

Andrei,

Did you have a test job example to go along with this?

k

Andrei Gansari

10:06 p.m.

New subject: [Lava-users] [EXT] Re: Test jobs to boot the target through JLink

I’ve tested lava+jlink on Cortex M with both onboard debugger and external debugger, like the one you referenced. You should change the following if needed:

address: 0x00000000 options: - '-device MK64FN1M0xxx12' - '-if SWD' - '-speed 4000'

The interface SWD is supported, not JTAG, that can be easily changed if you need to.

Regards, Andrei

From: Lava-users lava-users-bounces@lists.lavasoftware.org On Behalf Of dhanu msys Sent: Tuesday, November 26, 2019 7:49 AM To: Kumar Gala kumar.gala@linaro.org Cc: Andrei Gansari andrei.gansari@linaro.org; lava-users lava-users@lists.lavasoftware.org Subject: [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

Caution: EXT Email Hi Kumar,

Thanks for sharing the reference.

It's better to have some references for the test jobs submission also.

Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.

Here I have provided the JLink Interface , which we are going to use for the development.

https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_...https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thingbits.net%2Fproducts%2Fsegger-j-link-base-jtag-swd-debugger%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26gclid%3DCjwKCAiAlO7uBRANEiwA_vXQ-5LfXaVZ19mdNVQKMTOJJEXE6SCTlQl2y1ToYL7E06ebBwaEOUdy9xoC7W4QAvD_BwE&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=CfJeEKhiueckVp%2BktqM1a03ifAmEEbPQNFHv%2FFCFU3Q%3D&reserved=0

Regards, Dhanunjaya. P

On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala <kumar.gala@linaro.orgmailto:kumar.gala@linaro.org> wrote:

...

On Nov 21, 2019, at 11:06 PM, dhanu msys <dhanuskd.palnati@gmail.commailto:dhanuskd.palnati@gmail.com> wrote:

Hi Team,

Can you please share some reference test jobs to run the tests using J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809...https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fagansari%2Flite-lava%2Fblob%2F35a5bcbc01780638e6fd5e126bdfe18098c4ae77%2Flava_scheduler_app%2Ftests%2Fdevice-types%2Ffrdm-k64f.jinja2&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=4mRnDcD0%2FqaCYVqAEGQcMwRfCGJpr1nR8cmyzsBF%2FJ4%3D&reserved=0

Andrei,

Did you have a test job example to go along with this?

- k

dhanu msys

21 Jan 21 Jan

10:58 p.m.

New subject: [Lava-users] [EXT] Re: Test jobs to boot the target through JLink

Hi Andrei , Hi Kumar,

Can you please share some of the Test Job definition references to check the Jlink-based test jobs configurations.

Thanks & Regards, Dhanunjaya. P

On Tue, Nov 26, 2019 at 2:36 PM Andrei Gansari andrei.gansari@nxp.com wrote:

...

I’ve tested lava+jlink on Cortex M with both onboard debugger and external debugger, like the one you referenced.

You should change the following if needed:

address:

*0x00000000*

options:

'-device *MK64FN1M0xxx12'*

'-if SWD'

'-speed 4000'

The interface SWD is supported, not JTAG, that can be easily changed if you need to.

Regards,

Andrei

*From:* Lava-users lava-users-bounces@lists.lavasoftware.org *On Behalf Of *dhanu msys *Sent:* Tuesday, November 26, 2019 7:49 AM *To:* Kumar Gala kumar.gala@linaro.org *Cc:* Andrei Gansari andrei.gansari@linaro.org; lava-users < lava-users@lists.lavasoftware.org> *Subject:* [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

*Caution: *EXT Email

Hi Kumar,

Thanks for sharing the reference.

It's better to have some references for the test jobs submission also.

Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.

Here I have provided the JLink Interface , which we are going to use for the development.

https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thingbits.net%2Fproducts%2Fsegger-j-link-base-jtag-swd-debugger%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26gclid%3DCjwKCAiAlO7uBRANEiwA_vXQ-5LfXaVZ19mdNVQKMTOJJEXE6SCTlQl2y1ToYL7E06ebBwaEOUdy9xoC7W4QAvD_BwE&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=CfJeEKhiueckVp%2BktqM1a03ifAmEEbPQNFHv%2FFCFU3Q%3D&reserved=0

Regards,

Dhanunjaya. P

On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala kumar.gala@linaro.org wrote:

...
On Nov 21, 2019, at 11:06 PM, dhanu msys dhanuskd.palnati@gmail.com

wrote:

...
Hi Team,

Can you please share some reference test jobs to run the tests using

J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fagansari%2Flite-lava%2Fblob%2F35a5bcbc01780638e6fd5e126bdfe18098c4ae77%2Flava_scheduler_app%2Ftests%2Fdevice-types%2Ffrdm-k64f.jinja2&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=4mRnDcD0%2FqaCYVqAEGQcMwRfCGJpr1nR8cmyzsBF%2FJ4%3D&reserved=0

Andrei,

Did you have a test job example to go along with this?

k

dhanu msys

11:30 p.m.

New subject: [Lava-users] [EXT] Re: Test jobs to boot the target through JLink

Hi Andrei,

Based on the information shared earlier , i have tried to configure the device type to make use of jlink based boot method test job , but i have faced an issue "Configuration Error: missing or invalid template*.* Jobs requesting this device type (fpga_a64) will not be able to start until a template is available on the master."

Can you please check once and share the updated Device-Type Template also.

Thanks & Regards, Dhanunjaya. P

On Tue, Jan 21, 2020 at 3:28 PM dhanu msys dhanuskd.palnati@gmail.com wrote:

...

Hi Andrei , Hi Kumar,

Can you please share some of the Test Job definition references to check the Jlink-based test jobs configurations.

Thanks & Regards, Dhanunjaya. P

On Tue, Nov 26, 2019 at 2:36 PM Andrei Gansari andrei.gansari@nxp.com wrote:

...
I’ve tested lava+jlink on Cortex M with both onboard debugger and external debugger, like the one you referenced.

You should change the following if needed:

address:

*0x00000000*

options:

'-device *MK64FN1M0xxx12'*

'-if SWD'

'-speed 4000'

The interface SWD is supported, not JTAG, that can be easily changed if you need to.

Regards,

Andrei

*From:* Lava-users lava-users-bounces@lists.lavasoftware.org *On Behalf Of *dhanu msys *Sent:* Tuesday, November 26, 2019 7:49 AM *To:* Kumar Gala kumar.gala@linaro.org *Cc:* Andrei Gansari andrei.gansari@linaro.org; lava-users < lava-users@lists.lavasoftware.org> *Subject:* [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

*Caution: *EXT Email

Hi Kumar,

Thanks for sharing the reference.

It's better to have some references for the test jobs submission also.

Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.

Here I have provided the JLink Interface , which we are going to use for the development.

https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thingbits.net%2Fproducts%2Fsegger-j-link-base-jtag-swd-debugger%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26gclid%3DCjwKCAiAlO7uBRANEiwA_vXQ-5LfXaVZ19mdNVQKMTOJJEXE6SCTlQl2y1ToYL7E06ebBwaEOUdy9xoC7W4QAvD_BwE&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=CfJeEKhiueckVp%2BktqM1a03ifAmEEbPQNFHv%2FFCFU3Q%3D&reserved=0

Regards,

Dhanunjaya. P

On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala kumar.gala@linaro.org wrote:

...
On Nov 21, 2019, at 11:06 PM, dhanu msys dhanuskd.palnati@gmail.com

wrote:

...
Hi Team,

Can you please share some reference test jobs to run the tests using

J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fagansari%2Flite-lava%2Fblob%2F35a5bcbc01780638e6fd5e126bdfe18098c4ae77%2Flava_scheduler_app%2Ftests%2Fdevice-types%2Ffrdm-k64f.jinja2&data=02%7C01%7Candrei.gansari%40nxp.com%7C98744916fcc64502aaee08d772347bf3%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637103442052415357&sdata=4mRnDcD0%2FqaCYVqAEGQcMwRfCGJpr1nR8cmyzsBF%2FJ4%3D&reserved=0

Andrei,

Did you have a test job example to go along with this?

k

Andrei Gansari

22 Jan 22 Jan

12:59 a.m.

New subject: [Lava-users] [EXT] Re: Test jobs to boot the target through JLink

Hello Dhanunjaya. P,

You need to create a yaml file in lava/lava_dispatcher/tests/sample_jobs/fpga_a64-jlink.yaml … assuming you have already created the device fpga_a64.

You have an example of FRDM-K64F booting cmsis-dap here: https://github.com/Linaro/lite-lava-docker-compose/blob/lite/example/lava.jo... You need to replace “method: cmsis-dap” -> “method: jlink”

I didn’t run a clean lava environment, so I maybe missing something.

Andrei G.

From: dhanu msys dhanuskd.palnati@gmail.com Sent: Tuesday, January 21, 2020 12:31 PM To: Andrei Gansari andrei.gansari@nxp.com Cc: Kumar Gala kumar.gala@linaro.org; Andrei Gansari andrei.gansari@linaro.org; lava-users lava-users@lists.lavasoftware.org Subject: Re: [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

Caution: EXT Email Hi Andrei,

Based on the information shared earlier , i have tried to configure the device type to make use of jlink based boot method test job , but i have faced an issue "Configuration Error: missing or invalid template. Jobs requesting this device type (fpga_a64) will not be able to start until a template is available on the master."

Can you please check once and share the updated Device-Type Template also.

Thanks & Regards, Dhanunjaya. P

On Tue, Jan 21, 2020 at 3:28 PM dhanu msys <dhanuskd.palnati@gmail.commailto:dhanuskd.palnati@gmail.com> wrote: Hi Andrei , Hi Kumar,

Can you please share some of the Test Job definition references to check the Jlink-based test jobs configurations.

Thanks & Regards, Dhanunjaya. P

On Tue, Nov 26, 2019 at 2:36 PM Andrei Gansari <andrei.gansari@nxp.commailto:andrei.gansari@nxp.com> wrote: I’ve tested lava+jlink on Cortex M with both onboard debugger and external debugger, like the one you referenced. You should change the following if needed:

address: 0x00000000 options: - '-device MK64FN1M0xxx12' - '-if SWD' - '-speed 4000'

The interface SWD is supported, not JTAG, that can be easily changed if you need to.

Regards, Andrei

From: Lava-users <lava-users-bounces@lists.lavasoftware.orgmailto:lava-users-bounces@lists.lavasoftware.org> On Behalf Of dhanu msys Sent: Tuesday, November 26, 2019 7:49 AM To: Kumar Gala <kumar.gala@linaro.orgmailto:kumar.gala@linaro.org> Cc: Andrei Gansari <andrei.gansari@linaro.orgmailto:andrei.gansari@linaro.org>; lava-users <lava-users@lists.lavasoftware.orgmailto:lava-users@lists.lavasoftware.org> Subject: [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

Caution: EXT Email Hi Kumar,

Thanks for sharing the reference.

It's better to have some references for the test jobs submission also.

Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.

Here I have provided the JLink Interface , which we are going to use for the development.

https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_...https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thingbits.net%2Fproducts%2Fsegger-j-link-base-jtag-swd-debugger%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26gclid%3DCjwKCAiAlO7uBRANEiwA_vXQ-5LfXaVZ19mdNVQKMTOJJEXE6SCTlQl2y1ToYL7E06ebBwaEOUdy9xoC7W4QAvD_BwE&data=02%7C01%7Candrei.gansari%40nxp.com%7Ca2c8650a8ac848ad509108d79e5cfae7%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637151994488592509&sdata=E0fyFi0cjizCv05ciUnIiNtNIahpooCR1Dwt%2BXigHTs%3D&reserved=0

Regards, Dhanunjaya. P

On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala <kumar.gala@linaro.orgmailto:kumar.gala@linaro.org> wrote:

...

On Nov 21, 2019, at 11:06 PM, dhanu msys <dhanuskd.palnati@gmail.commailto:dhanuskd.palnati@gmail.com> wrote:

Hi Team,

Can you please share some reference test jobs to run the tests using J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809...https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fagansari%2Flite-lava%2Fblob%2F35a5bcbc01780638e6fd5e126bdfe18098c4ae77%2Flava_scheduler_app%2Ftests%2Fdevice-types%2Ffrdm-k64f.jinja2&data=02%7C01%7Candrei.gansari%40nxp.com%7Ca2c8650a8ac848ad509108d79e5cfae7%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637151994488602508&sdata=I40vIhf5dcZ3aS2vQ6TXSoFX%2FuuqFL2%2FfhomTAgyXbw%3D&reserved=0

Andrei,

Did you have a test job example to go along with this?

- k

dhanu msys

24 Jan 24 Jan

2:13 a.m.

New subject: [Lava-users] [EXT] Re: Test jobs to boot the target through JLink

Hi Andrei,

I run the test job based on the references shared by you.

But , facing the error , while running the test job.

Here I have attached the device template & device configuration files along with the error.

Please find the attachments & please provide me the inputs.

Thanks in Advance.

Regards, Dhanunjaya. P

On Tue, Jan 21, 2020 at 5:29 PM Andrei Gansari andrei.gansari@nxp.com wrote:

...

Hello Dhanunjaya. P,

You need to create a yaml file in lava/lava_dispatcher/tests/sample_jobs/fpga_a64-jlink.yaml … assuming you have already created the device fpga_a64.

You have an example of FRDM-K64F booting cmsis-dap here:

https://github.com/Linaro/lite-lava-docker-compose/blob/lite/example/lava.jo...

You need to replace “method: cmsis-dap” -> “method: jlink”

I didn’t run a clean lava environment, so I maybe missing something.

Andrei G.

*From:* dhanu msys dhanuskd.palnati@gmail.com *Sent:* Tuesday, January 21, 2020 12:31 PM *To:* Andrei Gansari andrei.gansari@nxp.com *Cc:* Kumar Gala kumar.gala@linaro.org; Andrei Gansari < andrei.gansari@linaro.org>; lava-users lava-users@lists.lavasoftware.org *Subject:* Re: [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

*Caution: *EXT Email

Hi Andrei,

Based on the information shared earlier , i have tried to configure the device type to make use of jlink based boot method test job , but i have faced an issue "Configuration Error: missing or invalid template*.* Jobs requesting this device type (fpga_a64) will not be able to start until a template is available on the master."

Can you please check once and share the updated Device-Type Template also.

Thanks & Regards,

Dhanunjaya. P

On Tue, Jan 21, 2020 at 3:28 PM dhanu msys dhanuskd.palnati@gmail.com wrote:

Hi Andrei ,

Hi Kumar,

Can you please share some of the Test Job definition references to check the Jlink-based test jobs configurations.

Thanks & Regards,

Dhanunjaya. P

On Tue, Nov 26, 2019 at 2:36 PM Andrei Gansari andrei.gansari@nxp.com wrote:

I’ve tested lava+jlink on Cortex M with both onboard debugger and external debugger, like the one you referenced.

You should change the following if needed:

address:

*0x00000000*

options:

'-device *MK64FN1M0xxx12'*

'-if SWD'

'-speed 4000'

The interface SWD is supported, not JTAG, that can be easily changed if you need to.

Regards,

Andrei

*From:* Lava-users lava-users-bounces@lists.lavasoftware.org *On Behalf Of *dhanu msys *Sent:* Tuesday, November 26, 2019 7:49 AM *To:* Kumar Gala kumar.gala@linaro.org *Cc:* Andrei Gansari andrei.gansari@linaro.org; lava-users < lava-users@lists.lavasoftware.org> *Subject:* [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

*Caution: *EXT Email

Hi Kumar,

Thanks for sharing the reference.

It's better to have some references for the test jobs submission also.

Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.

Here I have provided the JLink Interface , which we are going to use for the development.

https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thingbits.net%2Fproducts%2Fsegger-j-link-base-jtag-swd-debugger%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26gclid%3DCjwKCAiAlO7uBRANEiwA_vXQ-5LfXaVZ19mdNVQKMTOJJEXE6SCTlQl2y1ToYL7E06ebBwaEOUdy9xoC7W4QAvD_BwE&data=02%7C01%7Candrei.gansari%40nxp.com%7Ca2c8650a8ac848ad509108d79e5cfae7%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637151994488592509&sdata=E0fyFi0cjizCv05ciUnIiNtNIahpooCR1Dwt%2BXigHTs%3D&reserved=0

Regards,

Dhanunjaya. P

On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala kumar.gala@linaro.org wrote:

...
On Nov 21, 2019, at 11:06 PM, dhanu msys dhanuskd.palnati@gmail.com

wrote:

...
Hi Team,

Can you please share some reference test jobs to run the tests using

J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809... https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fagansari%2Flite-lava%2Fblob%2F35a5bcbc01780638e6fd5e126bdfe18098c4ae77%2Flava_scheduler_app%2Ftests%2Fdevice-types%2Ffrdm-k64f.jinja2&data=02%7C01%7Candrei.gansari%40nxp.com%7Ca2c8650a8ac848ad509108d79e5cfae7%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637151994488602508&sdata=I40vIhf5dcZ3aS2vQ6TXSoFX%2FuuqFL2%2FfhomTAgyXbw%3D&reserved=0

Andrei,

Did you have a test job example to go along with this?

k

Andrei Gansari

3:03 a.m.

New subject: [Lava-users] [EXT] Re: Test jobs to boot the target through JLink

From the screenshot it looks like you have a version of LAVA that does not support jlink boot method. JLink was added in version 2019.10-1

Andrei

From: dhanu msys dhanuskd.palnati@gmail.com Sent: Thursday, January 23, 2020 3:13 PM To: Andrei Gansari andrei.gansari@nxp.com Cc: Kumar Gala kumar.gala@linaro.org; Andrei Gansari andrei.gansari@linaro.org; lava-users lava-users@lists.lavasoftware.org Subject: Re: [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

Caution: EXT Email Hi Andrei,

I run the test job based on the references shared by you.

But , facing the error , while running the test job.

Here I have attached the device template & device configuration files along with the error.

Please find the attachments & please provide me the inputs.

Thanks in Advance.

Regards, Dhanunjaya. P

On Tue, Jan 21, 2020 at 5:29 PM Andrei Gansari <andrei.gansari@nxp.commailto:andrei.gansari@nxp.com> wrote: Hello Dhanunjaya. P,

You need to create a yaml file in lava/lava_dispatcher/tests/sample_jobs/fpga_a64-jlink.yaml … assuming you have already created the device fpga_a64.

You have an example of FRDM-K64F booting cmsis-dap here: https://github.com/Linaro/lite-lava-docker-compose/blob/lite/example/lava.jo...https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FLinaro%2Flite-lava-docker-compose%2Fblob%2Flite%2Fexample%2Flava.job&data=02%7C01%7Candrei.gansari%40nxp.com%7C2d20e91502664ddd02b408d7a006076d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637153820075952931&sdata=w%2BLJcoonptmvoD0G0jYmuNAp6gFUOTZEVbh2LOEfbPs%3D&reserved=0 You need to replace “method: cmsis-dap” -> “method: jlink”

I didn’t run a clean lava environment, so I maybe missing something.

Andrei G.

From: dhanu msys <dhanuskd.palnati@gmail.commailto:dhanuskd.palnati@gmail.com> Sent: Tuesday, January 21, 2020 12:31 PM To: Andrei Gansari <andrei.gansari@nxp.commailto:andrei.gansari@nxp.com> Cc: Kumar Gala <kumar.gala@linaro.orgmailto:kumar.gala@linaro.org>; Andrei Gansari <andrei.gansari@linaro.orgmailto:andrei.gansari@linaro.org>; lava-users <lava-users@lists.lavasoftware.orgmailto:lava-users@lists.lavasoftware.org> Subject: Re: [EXT] Re: [Lava-users] Test jobs to boot the target through JLink

Caution: EXT Email Hi Andrei,

Based on the information shared earlier , i have tried to configure the device type to make use of jlink based boot method test job , but i have faced an issue "Configuration Error: missing or invalid template. Jobs requesting this device type (fpga_a64) will not be able to start until a template is available on the master."

Can you please check once and share the updated Device-Type Template also.

Thanks & Regards, Dhanunjaya. P

On Tue, Jan 21, 2020 at 3:28 PM dhanu msys <dhanuskd.palnati@gmail.commailto:dhanuskd.palnati@gmail.com> wrote: Hi Andrei , Hi Kumar,

Can you please share some of the Test Job definition references to check the Jlink-based test jobs configurations.

Thanks & Regards, Dhanunjaya. P

address: 0x00000000 options: - '-device MK64FN1M0xxx12' - '-if SWD' - '-speed 4000'

The interface SWD is supported, not JTAG, that can be easily changed if you need to.

Regards, Andrei

Caution: EXT Email Hi Kumar,

Thanks for sharing the reference.

It's better to have some references for the test jobs submission also.

Currently we are in initial phase to make use of LAVA , so we wants to check the feasibility to deploy through JLink based test jobs.

Here I have provided the JLink Interface , which we are going to use for the development.

https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm_...https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thingbits.net%2Fproducts%2Fsegger-j-link-base-jtag-swd-debugger%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26gclid%3DCjwKCAiAlO7uBRANEiwA_vXQ-5LfXaVZ19mdNVQKMTOJJEXE6SCTlQl2y1ToYL7E06ebBwaEOUdy9xoC7W4QAvD_BwE&data=02%7C01%7Candrei.gansari%40nxp.com%7C2d20e91502664ddd02b408d7a006076d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637153820075952931&sdata=5TYmLQK7zblie8%2FzD3Wgfw%2FPlVjj8%2FQClkDEaW19q5c%3D&reserved=0

Regards, Dhanunjaya. P

On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala <kumar.gala@linaro.orgmailto:kumar.gala@linaro.org> wrote:

...

On Nov 21, 2019, at 11:06 PM, dhanu msys <dhanuskd.palnati@gmail.commailto:dhanuskd.palnati@gmail.com> wrote:

Hi Team,

Can you please share some reference test jobs to run the tests using J-Link boot method.

Here’s a reference to the board cfg side change for J-Link:

https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe1809...https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fagansari%2Flite-lava%2Fblob%2F35a5bcbc01780638e6fd5e126bdfe18098c4ae77%2Flava_scheduler_app%2Ftests%2Fdevice-types%2Ffrdm-k64f.jinja2&data=02%7C01%7Candrei.gansari%40nxp.com%7C2d20e91502664ddd02b408d7a006076d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637153820075962928&sdata=7AQOD%2BWKeKeTA1nVjyYlWJxuFz7RTtIWJguLcEv5XOc%3D&reserved=0

Andrei,

Did you have a test job example to go along with this?

- k

1728

days inactive

1790

days old

lava-users@lists.lavasoftware.org

8 comments

participants

tags (0)

participants (3)

Andrei Gansari
dhanu msys
Kumar Gala