Hello Team,
Good Day to All!
We are setting up a new device into LAVA Automation with the following
requirements.
Flash panel to R4 image
Copy delta to R5
Deploy R5
reboot
Make sure the panel boots to R5
The Test definition i'm using is as follows:
actions:
- deploy:
to: flasher
images:
package:
url:
https://artifactory.softwaretools.com/artifactory/mfgtools-***-0v3
- boot:
timeout:
minutes: 15
commands:
- boot
method: u-boot
prompts:
- 'root@hon-grip'
auto_login:
login_prompt: 'login: '
username: root
password_prompt: 'Password:'
password: root
login_commands:
- coredump --enable
- sysinfo
- ifconfig
- networkctl status
- wget http://192.100.**.**/oslat
- ostree static-delta apply-offline /home/root/oslat
- ostree admin deploy
35b3297cf3e4bc59d2a21e2ae9f7a02ef3f7a940e37389a7e9ae66a610c60b7
- reboot
After reboot command is executed, the panel again prompts for login and
password, whereas I cannot declare auto_login for the second time.
Please let me know how to disable auto login after the reboot (for second
time login)
Best Regards
*Pavan Kumar*
Hello Remi,
A while back you gave a presentation [0] on your efforts on a new tool called LAVAPeur.
The project looks like a great idea.
I was just wondering, what is the current status of this work?
[0] https://resources.linaro.org/en/resource/hj6KGw9fnhKVgvXDdE3qAS
Kind regards, Chris
