Hello Team,
I was trying to flash a binary on the device and run the tests on the
device by using lava overlay.
Board flashes successfully but while booting the device in the boot log
there is a word "*** Invalid partition 3 ***" lava catches the key word
and throws an error message.
For the other devices it is not catching this error with the same boot log.
Only on one device I'm observing this issue.
Please let me know How to ignore the keyword and move on to run the tests.
matched a bootloader error message: 'Invalid partition' (17)
boot log:
*U-Boot SPL 2022.04 (Nov 30 2023 - 20:10:15
+0000)power_bd71837_initDDRINFO: start DRAM initDDRINFO: DRAM rate
1600MTSDDRINFO:ddrphy calibration doneDDRINFO: ddrmix config doneNormal
BootTrying to boot from MMC1hab fuse not enabledAuthenticate image from DDR
location 0x401fcdc0...NOTICE: BL31:
v2.6(release):lf-5.15.32-2.0.0-0-gc6a19b1a3-dirtyNOTICE: BL31: Built :
06:37:22, Jun 7 2022U-Boot 2022.04 (Nov 30 2023 - 20:10:15 +0000)CPU:
i.MX8MMD rev1.0 1600 MHz (running at 1200 MHz)CPU: Industrial temperature
grade (-40C to 105C) at 44CReset cause: PORModel: DRAM: 224
MiBboard_initCore: 61 devices, 21 uclasses, devicetree: separateMMC:
FSL_SDHC: 0Loading Environment from nowhere... OKIn: serialOut:
serialErr: serialSEC0: RNG instantiated BuildInfo: - ATF c6a19b1facmod
value is 1!pulse number is 0�flash target is MMC:0Fastboot: NormalNormal
BootHit any key to stop autoboot: 2 end: 3.4.2 bootloader-interrupt
(duration 00:00:05) [common]start: 3.4.3 bootloader-commands (timeout
00:02:52) [common]Setting prompt string to ['=>']bootloader-commands: Wait
for prompt ['=>'] (timeout 00:02:52) 0 Setting prompt string to
['=>']Sending with 5 millisecond of delaysetenv factorymode 1u-boot=>
setenv factorymode 1bootloader-commands: Wait for prompt ['=>'] (timeout
00:02:51)setenv factorymode 1Sending with 5 millisecond of
delaybootu-boot=> bootboot** Invalid partition 3 **Couldn't find partition
mmc 0:3Can't set block deviceuEnv not found in mmcpart3, checking
mmcpart1Failed to load '/boot/system/uEnv'uEnv not found in mmcpart 1
either!Booting from mmc ...## Error: \"w\" not definedmatched a bootloader
error message: 'Invalid partition' (17)end: 3.4.3 bootloader-commands
(duration 00:00:02) [common]case: bootloader-commandscase_id:
204071definition: lavaduration: 1.52extra: ...level: 3.4.3namespace:
commonresult: fail*
Best Regards
Pavan Kumar
